Pipe HeaterAn energy-saving equipment for pre-heating substances, installed prior to the substance equipment, it directly heats the substance, enabling it to circulate and heat at high temperatures, ultimately achieving the goal of energy conservation. It is used for pre-heating heavy oil, asphalt, and other types of fuel oil.
The pipe heater consists of two parts: the body and the control system. The heating element is encased in a stainless steel pipe sleeve, using high-temperature resistance alloy wire, crystalline magnesium oxide powder, and formed through compression technology. The control section employs a*** digital circuit, integrated circuit trigger, and high-reverse voltage thyristors, etc., to form a adjustable temperature measurement and constant temperature system for the normal operation of the electric heater.
Product Applications
Pipe heaterThe medium can be heated from the initial temperature to the desired temperature, up to 850°C. It has been applied in many scientific research and production laboratories in aerospace, industry, chemical industry, and colleges and universities. Particularly suitable for automatic temperature control and high-flow high-temperature combined systems and accessories testing. The heating medium of the product is non-conductive, non-combustible, non-explosive, and has no chemical corrosiveness. The heated space warms up quickly (可控).
Terms of Use
The working voltage should not exceed 1.1 times the rated value, and the housing should be effectively grounded.
2. The effective heating size must be fully immersed in water to prevent empty burning.
3. Regularly clean the surface scale from the pipes to prevent heat dissipation issues and extend the service life.
4. Components should be stored in a dry place. If the insulation resistance falls below 1MΩ after long-term storage, reduce the voltage, apply power to heat, or place in an oven to dry until the insulation resistance is restored.
Avoid excessive force when tightening the wiring screws.
Heats air to very high temperatures, up to 450°C, with the housing temperature around 50°C.
Rapid heating and cooling rate blocks, up to 10℃/s, offering quick and stable adjustment. No overshoot or lag in controlled air temperature, ensuring temperature control remains stable. Ideal for automatic control.
Excellent mechanical properties: Due to its alloy material heating element, it is more mechanically durable under the impact of high-pressure air flow than any other heating element.
Under strict adherence to the usage procedures, the lifespan can extend for a decade or more.
