High-Temperature Vacuum Dryer GZF-6090

Overview of Usage:

A vacuum drying oven is a box-type drying equipment that dries materials under negative pressure conditions. It utilizes a vacuum pump to remove gas and moisture, creating a vacuum state inside the chamber, lowering the boiling point of water, and speeding up the drying process. It is used for powder drying, material annealing, semiconductor processing, new energy battery testing, aerospace component encapsulation testing, bubble and moisture removal during the production of electronic products, and hardening drying, etc. It is widely used in research fields such as electronic chemistry, agricultural science, and environmental protection.

The GZF series vacuum dryers, based on high-temperature drying, further enhance performance by incorporating vacuum conditions. This significantly lowers the boiling point and steam pressure, providing a dust-free, vortex-free drying process with a gentle environment. It also makes solvent vapors easier to collect, discharge, or recycle. Additionally, storage, heating, testing, and drying are conducted in an oxygen-free or inert gas atmosphere, making the test samples less prone to oxidation.

Technical Features:

1.Cuboid Studio utilizes an effective volume of...

2. Double-layer steel plate reinforced door, large-angle telescopic steel plate hinges.

3. High-temperature resistant silicone rubber door seal strip for one-time casting, ensuring effective sealing.

4. Low-temperature cooling temperature reduction sealing ring device.

5. Locking buckle tension adjustable door locks, ensuring a good vacuum level.

6. The studio is constructed with stainless steel sheets.

7. High-temperature specialized sealing valves.

Product Advantages:

• Vacuum environments significantly lower the boiling points of liquids that need to be evaporated, thus vacuum drying can be easily applied to heat-sensitive materials.

• For samples that are difficult to dry, such as powders or granular samples, vacuum drying can effectively shorten the drying time.

• Complex mechanical components or other porous samples are cleaned and then dried using vacuum drying methods. After drying, no residual substances are left. Compared to conventional drying that relies on air circulation, powdered samples are not blown or moved by the flowing air.

• Under vacuum or inert conditions, the possibility of oxidizers exploding upon heating is eliminated, making it more reliable.

• The unique cooling structure ensures maximum airtightness and prevents vacuum leakage.

• Disengaging the vacuum device can reduce the impact of large air flow on the test material itself.

Product Specifications:

• Model: GZF-6090

• Power Voltage: 220V/50Hz

• Input Power: 4.5 kW

• Temperature Control Range: RT+50~400℃

• Temperature resolution; 0.1℃

• Temperature fluctuation: ±0.5-1.0℃

• Ambient Temperature; +5~40℃

• Vacuum Degree: ≤133 Pa (-0.1 MPa)

• Inner Dimension; 450*450*450

• Dimensions: 900*700*1500

• Inner Material: Stainless Steel Liner, Cold Rolled Steel Shell with Powder Coating

Product Images: