Shaanxi light steel villa manufacturer's construction of light steel villa walls are divided into interior and exterior walls, with the main material being light steel studs, and 100mm glass fiber cotton is laid in the gaps of the stud columns. Exterior wall plan one: (divided by the light steel stud columns) from outside in: 12mm OSB board, one-way breathable paper, metal carved panel. From inside out: 12mm thick gypsum board. Exterior wall plan two: (divided by the light steel stud columns with fixed folding parts) from outside in: 12mm OSB board, one-way breathable paper, extruded board, metal carved panel. From inside out: 12mm thick gypsum board. Interior wall plan: divided by the light steel stud columns, with thick gypsum board or cement board on both sides.

Xi'an Chuangjing Architectural Engineering Co., Ltd. is dedicated to prefabricated buildings, integrated housing, and light steel villas. As society progresses and develops, the demand for building quality continues to rise. Providing comfortable, aesthetically pleasing, fashionable, and energy-saving green buildings is the historical mission of contemporary builders.

Shaanxi Lightweight Steel Villa Manufacturer is a technical team established by Xi'an Chuangjing Construction Engineering Co., Ltd., boasting years of experience. Lightweight steel villas differ significantly from traditional brick-and-concrete or frame structures. This is because the profiles used in lightweight steel villas are all of the lightweight type. Among lightweight profiles, the most common are shaped steel sections. The structural loads of lightweight steel structures are all completed through various specifications and shapes. Therefore, at this point, we need to make material selection and processing.

① Material Selection. The material selection process involves calculating the required materials based on the construction drawings we have prepared. This allows us to accurately identify the specifications, sizes, and quantities of each type of steel beam needed. After calculating, we can pre-determine the lightweight steel profiles required for our prefabricated steel villa.

② Material Procurement and Processing. Once we have calculated all the materials, it's time to purchase them. Many of the required light-gauge steel materials need to be pre-fabricated. For instance, wall panel materials, roof materials, and shaped steel. At this point, we need to prepare and process these materials in advance and then schedule the delivery of the materials as needed.