Pre-fabricated cabin structureComposition：
1. The interior space and structure of the prefabricated cabin, which is equipped with secondary equipment, air conditioning, lighting, fire protection, security, and image devices, also meets the working requirements of equipment operation and maintenance personnel, facilitating easy maintenance. The exterior wall material of the prefabricated cabin is made of fire-resistant and waterproof corrugated board or galvanized steel plate, filled with thermal insulation and fire-resistant boards and insulating cotton to block sunlight and ensure the cabin's thermal insulation. The lighting and air conditioning inside the cabin can be chosen according to needs. To save effectively, industrial air conditioning and exhaust systems are installed, allowing for real-time adjustment of the cabin's operating environment. As they are currently unattended, security, image surveillance, and fire alarms are also installed inside the cabin.AlertSystems; wiring arrangements can be configured according to the normal operational requirements of the equipment.
2. Pre-fabricated Container Type GIS Combination Electrics and Pre-fabricated Substation. The Pre-fabricated Container Type GIS Combination Electrics include prefabricated cabinets, incoming and outgoing line bays, and sectioning and protection bays; the incoming line bay includes incoming cable terminations, disconnect switches one, and disconnect switches.
3. Transformer 1 and Circuit Breaker 1; Main transformer spacing includes the terminal of the outgoing cable and three disconnect switches; the sectioned measuring and protecting spacing includes one bus sectioning spacing and two measuring and protecting spacings, with the bus sectioning spacing containing Circuit Breaker 2, Transformer 2, and two Disconnect Switch 4, and the measuring and protecting spacing includes the Transformer 3 and Disconnect Switch 5 connected together; a sectioned measuring and protecting spacing is set between the intervals of adjacent groups of incoming and outgoing lines, forming a linear structure with the incoming and outgoing line intervals, sectioned measuring and protecting intervals, and busbars, all located within a prefabricated housing. The prefabricated secondary assembly equipment compartment consists of the compartment, secondary equipment, air conditioning, lighting, fire protection, security, and image equipment, with all equipment within the compartment being fully wired and debugged at the factory, and then transported to the site as a whole or in 2 to 3 individual units.
Power prefabricated modules are mainly used for the integration of high-voltage cabinets and low-voltage cabinets; large-scale power prefabricated modules can integrate transformers; energy storage prefabricated modules are commonly used for energy storage with lithium phosphate batteries; data center integrated prefabricated modules are used for grid data monitoring integration. Length byCustom sizes from 4000mm to 200000mm available, with standard width ranging from 2500mm to 3500mm and height typically between 2900mm and 3200mm. The main frame is constructed using channel steel welding. The prefabricated container has many advantages, including lightning protection, wind resistance, earthquake resistance, convenience, speed, and environmental friendliness. For more information, please contact us.
