1、Product Name: Tunnel Furnace
Product IntroductionTotal length of equipment:for12000m wide1.25m high1.76m；
Inlet height0.22mThe total length of the heating section11200m；
feed inlet width0.85m, Feed section length0.4m,discharge section0.4m；
Temperature distinction5Individual temperature zone control, each temperature zone includes main control temperature and over temperature protection, and can be independently controlled.
temperature range：Room temperature~+300℃, adjustable, constant temperature.
Temperature Uniformity：±5℃(Under constant temperature, no-load test)
Instrument temperature control accuracy：±1℃
Wind transportation method：left and right+Forced airflow at the bottom.
power supply：Three phase five wire system,380V，50HZ
heating tube：Adopting the Shanghai Crown Top brand304Stainless steel finned heating tube has the characteristics of high temperature resistance and fast heat dissipation.
Total power approximately60KW。
feeding section：The feeding and distribution sensor detects whether the robot has discharged materials.
Thermal insulation curtain：The loading and unloading ports are insulated with high-temperature resistant PTFE curtains.
conveying device：The conveyor chain adopts two independent chainsSUS304Stainless steel plate chain conveyor, width850mm。
Transmission power system：adopt2Panasonic servo motor setCrown Top BrandReducer, capable of multiple modes such as forward and reverse rotation, independently controls the direction of operation and conveying speed.
Transportation speed：The left conveyor has the fastest speed5rice/minute; The fastest conveying speed is on the right side5rice/minute,The switching speed between adjacent trays shall not exceed3Seconds)
Electrical control section：adopt7Inch Mitsubishi human-machine interface+PLCProgramming control, equipped with temperature module control.
Over-temperature alarm：When the actual detected temperature exceeds the set value of the over temperature protection, the heating power supply is automatically cut off, providing dual protection function.
Product advantages:Adopting two independent methodsSUS304Stainless steel plate chain conveyor, width850mm。
adoptCrown Top2Equipped with Panasonic servo motor and reducer, it can operate in multiple modes such as forward and reverse rotation, and independently control the direction of operation and conveying speed.Through fixture positioning and the use of robotic arms for automated loading and unloading, it is fast and efficient.
Application scope of the product:car moldToolsFields such as electronics, printing, and wood industry
