Introduction to the functions of the intelligent version 10 electric vehicle charging station

This machine is a highly intelligent electric vehicle charging station with 10 output channels, capable of charging 10 electric vehicles simultaneously.

This machine can achieve coin operated mobile payment and card swiping functions. The scanning function can display the current number of card swipes and the balance of the card when swiping.

This machine uses an IC card for charging by swiping the card. It does not charge one yuan for a single swipe, and the amount deducted by swiping the card can be adjusted from 0.00 to 5 yuan (when 0.0, charging is not charged by default).

The charging time of the machine can be set according to needs, and different times for depositing three coins can be set. The third and above times are based on the time of the third coin.

This machine has a power failure memory function. If the machine suddenly runs out of power during the charging process, the time will continue to count according to the time before the power failure when the power is restarted.

This machine can be set with float charging (automatic power-off power) power adjustable from 0 to 30W.

This machine can be set with three levels of power segmented billing, with an output power of 800W (the billing time for four levels of power can be adjusted).

This machine can set the power consumption.

This machine has a card refund function (can be set to turn on/off by oneself)

This machine has overload protection and can automatically recover. If the electric vehicle charger exceeds the power value set by this machine, the digital display on this circuit will continue to flash, and the voice prompt will indicate that the power is too high. If the charger power is not removed or reduced after 30M seconds, the machine will automatically cut off the output and reset the charging time of this circuit

Voice prompts for the entire process of machine operation