Adhesive aids are primarily used for the surface pretreatment of materials with low surface energy, enhancing the initial adhesion during tape application. Particularly suitable for acrylic foam tape types.
Adhesive Types: Glass, electronic components, plastics, rubber, metals, other materials, ceramics. Used for treating adhesive surfaces, accelerating the peel-off speed of the tape, and enhancing adhesive strength. Can increase the tape's adhesion by 80%. Can replace American 3M94 adhesive aid, K520 primer, and 4298UV primer.
Physical and ChemicalBenchmark
----------------------------------------------------------------
Physical form, color, odor - Low viscosity liquidAmber, with a solvent odor
Boiling Point: 76.67°C
Flash Point: -21.0 degrees Celsius
Self-ignitingN/A
Vapor Pressure: 68 mmHg @ 20.0°C
Water Solubility: Negligible (<0.1%)
Specific Gravity 0.82 g/cm³@ 25.0Degree
Steam Density: Not Determined
Volatile Organic Compounds (VOCs)512kg/L
Evaporation Rate - Not Determined
Viscosity25Centistokes (@ 2)5.0 C
Usage Instructions：
1Clean the area to be adhered to, ensuring the surface is free of dust, moisture, and oil stains. It is recommended to wipe with isopropyl alcohol.
2Please tightly close the bottle cap after use, as this product is volatile.
3Apply the base coating with a sponge or non-woven fabric to the area where the item needs to be attached, ensure even coverage, then let it dry.2 Minute to re-glue.
4Peel the tape and press it onto the desired area, then secure it tightly.
5Roll a small roller over the double-sided tape to ensure a tighter bond.
Cautionary Notes:
1Please perform a small-scale test to determine if there is a chemical reaction between this product and the material to be coated before application.
2This product is volatile.,So be sure to pay close attention to the sealing when in use; immediately press the bottle mouth tight after removing the bristle brush. After use, tighten the cap securely.
3The product has a certain stickiness in its initial state.
4This product is not a cleaning liquid; do not use it incorrectly. Not suitable for children! Avoid contact with eyes and skin. In case of accidental contact, rinse immediately with water.
5This product does not have adhesive properties; it cannot be used alone and must be used in conjunction with tape.
Universal Adhesive Primer
Enhance initial adhesion and improve adhesion strength of the tape.
￥100.00
83
