Light yellowClear Liquid0.81 g/cm³946ml Round Tin100 per literInclusive of shipping and 13% VAT
Adhesive aids are primarily used for the surface pretreatment of materials with low surface energy, enhancing the initial adhesion during tape application. Particularly suitable for acrylic foam tape.
Adhesive Types: Glass, electronic components, plastics, rubbers, metals, other materials, ceramics. Used for treating adhesive surfaces, accelerating the peel speed of the tape, and enhancing adhesive strength. Can increase the tape's adhesive strength by 80%. Can replace the following American adhesives: 3M 94 adhesive promoter, K520 primer, and 4298 UV primer.
Physical and ChemicalIndex
Physical form, color, odor, viscosity liquidAmber-colored, with a solvent odor
Boiling Point: 76.67°C
Flash Point: -21.0 degrees Celsius
Self-ignitingNo content provided.
Vapor Pressure: 68 mmHg @ 20.0°C
Water Solubility: Negligible (<0.1%)
Specific Gravity 0.82 g/cm³ @ 25.0Degree
Steam Density: Not Determined
Volatile Organic Compounds (VOCs)512kg/L
Evaporation Rate: Not Determined
Viscosity25Centipoise (@ 2)5.0 C
Instructions：
1Clean the area to be bonded thoroughly, ensuring the surface is free of dust, moisture, and oil. It is recommended to wipe with isopropyl alcohol.
2Please ensure the cap is tightly sealed after use, as this product is volatile.
3Apply the primer with a sponge or non-woven fabric to the area where you need to stick things, ensure even coating and then let it dry.2 Wait a minute before re-gluing.
4Peel the tape and press it onto the desired sticking spot, then firmly press it down.
5Roll a small roller over the double-sided adhesive to ensure a tighter bond.
Cautionary Notes:
1Please perform a small-scale test to determine if there is a chemical reaction between this product and the material to be coated before application.
2This product is volatile.,So, be sure to pay close attention to the seal. It should be tightly closed immediately after the brush is removed. After use, tighten the cap securely.
3This product has an inherent stickiness in its initial state.
4This product is not a cleaning liquid; do not use it incorrectly. Not suitable for children! Avoid contact with eyes and skin. In case of accidental contact, rinse immediately with water.
5This product does not serve as an adhesive and cannot be used alone; it must be paired with tape.
