Glass-fiber reinforced plastic (GRP) integrated pumping stations are lifting equipment for wastewater, rainwater, drinking water, and effluent. These stations are factory-assembled and delivered to the site for installation, offering a turnkey solution. Jinze Salt City's integrated pumping stations are turnkey projects, with their cylindrical bodies cast from thickened medium-density GRP material. The main body of the pumping station consists of GRP wells, pumps, pipelines, valves, sensors, control systems, and ventilation systems, etc.
Glass Reinforced Plastic (GRP) Integrated Pump Station Process and Installation - Technical Parameters
High lift: 40 meters.
2. Longitudinal distance: 300 meters
3. High flow rate: 5-50 cubic meters per hour.
4. Power Range: 0.75KW - 7.5KW
5. The pump is a "ProMant" MPE(S) fully automatic single(three) phase sewage submersible cutter pump, with IP68 rating for the submersible motor.
6. Pump Station Volume: 250-5,300 liters
7. The sludge cutter pump offers various installation methods within the container, with particularly convenient self-coupled installation for replacement and maintenance.
8. The dual-pump installation allows for alternating operation and can be used simultaneously during high inflow water conditions.
Glass Reinforced Plastic (GRP) Integrated Pump Station Pricing Features
Highly integrated for easy automation
The pump station's main body is a composite wound fiberglass steel cylinder, featuring strong corrosion resistance. It is equipped with an immersion submersible pump, automatic coupling device, guide rod, inlet and outlet pipes, check valve, gate valve, flexible joints, etc., enabling an automatic, unattended control system. The front end of the gravity network can be set to have a grit basket grille manually cleaned by the user or to crush waste into particles of about 8mm using a粉碎型格栅, which are then directly discharged by the submersible pump without the need for manual retrieval and cleaning.
(2) Small land area, but high effective volume
The pump station boasts significant land-saving advantages. Currently, the cylinder diameter of large integrated sewage lifting pump stations is less than 4 meters, with a total land area not exceeding 30 square meters.
(3) Aesthetically pleasing and easily coordinates with surrounding environment
Pump stations are typically fully buried underground, with only maintenance holes and control boxes visible on the surface, resembling a common sewage inspection well. Optional scenic management rooms can be placed on the ground to blend well with the surrounding environment.
(4) Minimal environmental impact on surrounding areas
After the pumping station is buried underground, it does not emit odors and has a minimal impact on the environment, especially near locations such as hotels, residential communities, and administrative offices adjacent to the station. This significantly reduces unnecessary trouble caused by environmental issues in the future.
(5) High self-control level, low maintenance and operation costs
Pump stations can be equipped with pump control units, displaying pump operating status. They are内置with mobile communication modules, enabling direct transmission of operational fault information to the pump station management personnel. This achieves true unattended operation, significantly reducing labor management costs for pump stations. It also alleviates the workload of management staff and optimizes personnel allocation.
(6) Easy installation, short construction period
Pump stations are supplied as integrated units, with all internal installation and debugging completed at the factory. Prior to arrival, excavation can be conducted on-site. Once the pump station arrives, only the entire unit needs to be installed on-site, significantly reducing the construction period and costs. Consequently, the construction process is straightforward, with a shortened project timeline, leading to a lower overall deployment cost.
(7) Long service life, low long-term operation costs
The pump station's cylinder is made of fiberglass, with internal components in 304 stainless steel and galvanized carbon steel for corrosion resistance, ensuring a lifespan of over 30 years. The selected equipment parts have a low failure rate, and the submersible pump and格栅 are equipped with installation guides for easy maintenance. Moreover, the pump station can be lifted and relocated for secondary backfilling, allowing for reuse.

Glass Reinforced Plastic (GRP) Integrated Pump Station Pricing Overview
Glass-fiber reinforced plastic integrated pumping stations, as integrated units, are supplied as a complete set: pump station cylinder, pressure pipeline, maintenance platform, maintenance ladder, grating device, coupling system, ventilation equipment, anti-slip manhole covers, etc.
Attractive appearance
The glass-fiber reinforced plastic integrated pump station is fully buried underground, with only maintenance holes and control boxes left on the ground. An optional scenic management room can also be placed on the ground to harmonize with the surrounding environment.
Generally, the burial depth of pipelines should not exceed 5 meters; otherwise, a pumping station must be set up to raise the water level.
(2) Composition: Drain pump and auxiliary equipment. The auxiliary equipment includes a sedimentation pond and a grille.

Glass fiber reinforced plastic integrated pump stations offer the following advantages:
1. Complete set provided, factory预制.
2. Shortened construction period, reducing overall construction costs.
3. Underground installation saves land space.
4. No impact on surrounding environment.
5. Unattended automatic cleaning
6. Custom-tailored exclusive designs
7. Remote PLC Intelligent Control
Our company contributes to the wastewater treatment industry by providing innovative technology and product solutions to our customers.