Glass-fiber reinforced plastic (GRP) integrated pumping stations are equipment for lifting sewage, rainwater, drinking water, and wastewater. These are factory-assembled and delivered to the site for installation as turnkey pumping stations. The integrated pumping stations produced and developed by Yancheng Jinze are turnkey projects, with the pump station's cylinder made of thickened medium-density GRP material. The main body of the pumping station consists of GRP wells, pumps, pipelines, valves, sensors, control systems, and ventilation systems, among other components.
Glass Reinforced Plastic (GRP) Integrated Pump Station Technology and Installation - Technical Specifications
High Lift: 40 meters.
2. Horizontal distance: 300 meters.
3. High Flow Rate: 5-50 cubic meters per hour.
4. Power: 0.75KW - 7.5KW
5. The pump is a "ProMint" MPE(S) Automatic Single (Three) Phase Sewage Submersible Cutter Suction Pump, with IP68 rating for the submersible motor.
6. Pump Station Volume: 250-5,300 liters
7. The sludge cutter pump offers various installation methods within the container, with the self-coupled installation being particularly convenient for replacement and maintenance.
8. The dual-pump installation allows for alternating operation and can also be used simultaneously when the inflow of water is high.

HMPP Pump Station, Glass-Fiber Reinforced Plastic Pre-Made Pump Station, Underground Integrated Pump Station, HMPP Pre-Made Pump Station, Modular Pre-Made Pump Station, Integrated Axial Flow Pump Station, Rainwater and Sewage Pump Station, Integrated Sewage Lift Equipment, Integrated Pre-Made Lift Pump Station, Complete Integrated Pre-Made Pump Station

Glass Reinforced Plastic (GRP) Integrated Pump Station Pricing Features
Highly integrated, easy to achieve automation
The pump station's main body is a composite wound fiberglass steel cylinder, which boasts strong corrosion resistance. It is equipped with an immersion submersible pump, automatic coupling device, guide rod, inlet and outlet pipes, check valve, gate valve, flexible joints, etc. It can achieve an automatic, unattended control system. The inlet of the gravity network can be set to either manually clean the basket格栅 or crush waste into particles of about 8mm using a crushing grille, which are then directly discharged by the immersion submersible pump, eliminating the need for manual retrieval and cleaning.
(2) Small footprint, high usable volume
The pump station's footprint advantage is quite evident; currently, the diameter of the large integrated sewage lifting pump station's cylinder is less than 4 meters, and the total area does not exceed 30 square meters.
(3) Aesthetically pleasing and easily harmonizes with the surrounding environment
Pump stations are typically fully buried underground, with only maintenance openings and control boxes visible on the ground, resembling a standard sewage inspection well. An optional scenic management room can also be placed on the ground to blend well with the surrounding environment.
(4) Low environmental impact on surrounding area
After the pumping station is buried underground, it does not emit odors and has a minimal impact on the environment. This is particularly true when the station is near hotels, residential communities, and administrative offices, as it significantly reduces unnecessary麻烦 in the future due to environmental concerns.
(5) High self-control level, low maintenance and operation costs
Pump stations can be equipped with pump controllers, displaying the operational status of the pumps. They are built with an integrated mobile communication module, allowing direct transmission of operational fault information to the pump station managers. This achieves true unattended operation, significantly reducing the labor management costs for pump station operations. It also alleviates the workload of managers and facilitates the rational allocation of personnel.
(6) Simple installation, short construction period
Pump stations are supplied as integrated units, with all internal installation and debugging work completed at the factory. Prior to delivery, excavation can be carried out on-site. Once the pump station arrives, only the complete unit needs to be installed on-site, significantly reducing the construction period and costs. Therefore, the construction process is very simple, with a short construction timeline, and the overall implementation is expedited.
(7) Long service life, low long-term operation costs
The pump station's cylinder is made of glass fiber reinforced plastic, and the internal components are made of 304 stainless steel and hot-dipped galvanized carbon steel for corrosion resistance, with a service life of over 30 years. The equipment components have a low failure rate, and the submersible pump and格栅 come with installation guides for easy maintenance. Moreover, the pump station can be lifted and moved for secondary burial, allowing for reuse.

HMPP Pump Station, Fiberglass Reinforced Plastic (FRP) Pump Station, Underground Integrated Pump Station, HMPP Pre-Made Pump Station, Modular Pre-Made Pump Station, Integrated Axial Flow Pump Station, Rainwater and Sewage Pump Station, Integrated Sewage Lifting Equipment, Integrated Pre-Made Lifting Pump Station, Complete Integrated Pre-Made Pump Station

Glass-Fiber Reinforced Plastic (GRP) Integrated Pump Station Pricing Overview
Glass-fiber reinforced plastic integrated pumping stations, as integrated units, are provided as a complete set: pump station cylinder, pressure pipeline, maintenance platform, maintenance ladder, grating device, coupling system, ventilation equipment, anti-slip manhole covers, and more.
Aesthetically pleasing
The glass fiber reinforced plastic integrated pump station is fully buried underground, with only maintenance openings and control boxes visible on the ground. An optional scenic management room can also be placed above ground to harmonize with the surrounding environment.
Generally, pipeline burial depth should not exceed 5 meters; otherwise, a pump station must be set up to elevate water levels.
(2) Composition: Drainage pump and auxiliary equipment. The auxiliary equipment includes a sedimentation basin and a grating.
Glass fiber reinforced plastic integrated pump stations offer the following advantages:
1. Full set provided, factory预制.
2. Short construction period, reducing overall construction costs.
3. Subsurface installation saves land space.
4. No impact on surrounding environment.
5. Unattended automatic cleaning
6. Customized Exclusive Design
7. Remote PLC Intelligent Control.
Our company contributes to the wastewater treatment industry by providing innovative technology and product solutions to our clients.