Stainless Steel (AISI 304)
Stainless steel balls come in various types, including AISI 304, AISI 316, AISI 316L, AISI 420, AISI 420C, AISI 440, and AISI 440C. AISI 304 steel balls have low hardness but excellent corrosion resistance, making them suitable for applications involving corrosion, dyes, food processing, valves, and sex products.
Our factory's AISI 304 stainless steel balls:
Minimum Diameter: 2mm
Accuracy: G100
Hardness: HRc25-39
Stainless Steel (AISI 316L)
The carbon content of AISI 316L stainless steel balls is lower than that of AISI 316 material.
Offer enhanced corrosion resistance, as well as excellent resistance to sulfuric compounds.
Commonly used for valves and jewelry applications.
Our factory's AISI 316L steel balls:
Minimum Diameter: 2mm
Accuracy: G100
Hardness: HRc25-39
Stainless Steel (AISI 420)
AISI 420 features good hardness, excellent corrosion resistance, and strength, commonly used in all applications requiring corrosion resistance.
Bearings, valves, writing instruments, food environment, freshwater, numerous oils, etc., are subject to corrosion.
Products and weakly acidic environments. AISI 420 is also magnetic.
Our factory's AISI 420 stainless steel ball:
Minimum Diameter: 1.2mm
Accuracy: G10
Hardness: HRc52
Stainless Steel (AISI 420C)
AISI stainless steel balls offer the benefits of maximum hardness and corrosion resistance.
Characteristics: The hardness range of the 420C balls is slightly higher than that of the 420. Their excellent surface finish also makes them
Especially suitable for bearings, valves, and other harsh environment applications.
Our factory's AISI 420C stainless steel balls:
Minimum Diameter: 1.2mm
Accuracy: G10
Hardness: HRc52
Stainless Steel (AISI 440)
AISI 440 type stainless steel ball bearings are widely used in applications requiring hardness and dimensional stability.
Corrosion resistance and toughness. The 440 ball can withstand corrosion from fresh water, steam, crude oil, gasoline, and sweat.
Alcohol, blood, and food. Maximum corrosion and rust resistance is achieved only when all 440 balls are fully cured.
The surface is polished to a high gloss. The 440 ball is also magnetic.
Our factory's AISI 440 stainless steel balls:
Minimum Diameter: 1.2mm
Accuracy: G10
Hardness: HRc60-67
Stainless Steel (AISI 440C)
AISI 440C steel balls offer the highest strength and excellent corrosion resistance in stainless steel materials, and they also possess good hardness.
The 440C steel ball is commonly used in bearings, valves, and similar applications.
Our factory's AISI 440C stainless steel balls:
Minimum Diameter: 1.2mm
Accuracy: G10
Hardness: HRc60-67
Offshore Price: Negotiable
Supply Capacity:160ton/Month/ton
Minimum Quantity:20kg
Port: Shanghai
Payment Methods:L/C 、D/A 、D/P 、T/T、Western Union、Paypal
Dimensions:6.747mm 17/64''
Material:Gcr15
Hardness:HRC60-66
Accuracy Grade:G10
Material Characteristics: Low-alloyed martensitic chrome steel, known for its high hardness, wear resistance, high surface finish, and dimensional accuracy, is widely used in the manufacturing of mechanical components.
Application: Precision Bearings, Auto Parts (Brakes, Steering, Propeller Shafts), Bicycles, Mixers, Electrical Appliances, Sliders, Quick Connectors, Machining Equipment, Locks
Mechanical devices, conveyors, roller skates, pens, pumps, casters, measuring instruments, valves
Customer: √ Supplier √ Manufacturer √ Company √ Factory √ Distributor √ Agent √ End User
Marketing Regions: Asia, North America, Europe, South America
Product | 6.474mm 17/64'' G10 Chrome steel ball |
Materials | AISI52100/Gcr15/100Cr6/SUJ-2 |
Grade | G10 |
Surface | Zero defects, clean |
Inspection | 99.9% inspection |
Sample | Free Samples |
Safety | ROHS |
Sales Model | Wholesale or Retail |
Certification | ISO 9100; IATF16949 |
Packaging | Four small boxes in one carton. |
Chrome steel ballAISI52100 | ||||||||
Material Standards | Chemical Composition (%) | Hardness | ||||||
C | Cr | Ni | Si | Mn | P | S | ||
AISI52100 | 0.95-1.1 | 1.3-1.6 | / | ≤0.35 | 0.2-0.5 | ≤0.025 | ≤0.025 | HRC60-66 |
Dimensions:6.747mm PreciseGrade: G10 | ||||||||
Product | |
Materials | Stainless steel420 And420C |
Grade | G10-G1000 |
Surface | Zero defects, clean |
Dimensions | 1.5-25.4mm |
Samples | Free Samples |
Applied | Special bearings, anti-friction bearings, special pumps, roller balls, lighters, pens, car seat belts and components. |
Features | Martensitic hardened stainless steel balls, featuring excellent hardness, corrosion resistance, wear resistance, and durability. The balls are provided in passivated condition. |
Corrosion resistance | Excellent corrosion resistance in industrial atmospheres, freshwater, steam, alcohol, ammonia, several oil field products, organic compounds, dairy products, and mild acidic environments. Pale yellow in food and alkaline solutions. Fair salt atmosphere. It does not resist contact with seawater and strong acids (even when diluted). |
Certification | ISO 9100;2008SGS |
Packaging | Boxes, cardboard boxes, wooden pallets |
Materials
AISI 420 & 420C Stainless Steel | |||||||||
Material Specifications | Chemical Composition (%) 请注意，这里“（％）”直接从中文转换为美式英文的百分比符号，无需变化。 | Hardness (measured on parallel planes)HRC） | |||||||
C | SI | Mn | P | S | Ni | Cr | Mo | ||
AISI 420 | ≤0.26-0.35 | ≤1.00 | ≤1.00 | ≤0.035 | ≤0.03 | ≤0.06 | 12-14 | ≤0.75 | HRC48-50 |
AISI 420C | ≤0.36-0.45 | ≤0.60 | ≤0.80 | ≤0.035 | ≤0.03 | ≤0.06 | 12-14 | - | HRC52-55 |
Dimensions:1.5-25.4mm Precision Grade: G10-G1000 | |||||||||
Product | |
Materials | Stainless steel440 And440C |
Grade | G10-G1000 |
Surface | Zero defects, clean |
Dimensions | 2.381-25.4mm |
Samples | Free Samples |
Applied | Precision bearings, friction-reducing bearings, special valves, conveyor belts and drums, ballpoint pens. They are used in food processing, quick connectors, circulating ball bearings, knotting devices, and refining equipment. |
Features | Martensitic hardened stainless steel balls, known for their high hardness, wear resistance, surface finish, and narrow size tolerance. Due to these characteristics, this steel is often used in precision equipment. Balls are provided in passivated condition. |
Corrosion resistance | This material is resistant to corrosion when in contact with freshwater, steam, oil, gasoline, and alcohol. It will experience pitting corrosion in a marine environment. It has poor resistance to acidity in acidic conditions. |
Certification | ISO 9100;2008SGS |
Packaging | Boxes, cardboard boxes, wooden pallets |
Materials
AISI 440 & 440C Stainless Steel | |||||||||
Material Standards | Chemical Composition (%) | Hardness (measured on parallel planes)HRC） | |||||||
C | SI | Mn | P | S | Ni | Cr | Mo | ||
AISI 440 | ≤0.9-1 | ≤0.80 | ≤0.80 | ≤0.035 | ≤0.03 | ≤0.06 | 17-19 | - | HRC56-58 |
AISI 440C | ≤0.95-1.1 | ≤0.80 | ≤0.80 | ≤0.035 | ≤0.03 | ≤0.06 | 16-18 | 0.4-0.7 | HRC58-60 |
Dimensions:2.381-25.4mm Precision Grade: G10-G1000 |
Quality Assurance
Prior to packaging, the steel balls undergo final inspection, where surface roughness, roundness, waviness, batch dimensions, and hardness are checked in a precise laboratory according to the specified control plan and dock inspection procedures. Upon meeting all requirements, a test certificate will be prepared for the customer. Our sophisticated laboratory is equipped with high-precision machinery and equipment renowned worldwide, managed by qualified personnel who have received appropriate training.
Product | |
Materials | Stainless Steel201 |
Grade | G100-G1000 |
Surface | Zero defects, clean |
Dimensions | 2.381-12.7mm |
Samples | Free Samples |
Application | Special bearings, automotive parts, switches, die-casting equipment. They are widely used in the electronics industry. |
Features | Cr-Mn Stainless steel ball bearings, with performance similar toAISI 304 Ball bearings (slightly higher mechanical properties). Balls are provided in a passivated state. |
Corrosion resistance | Excellent corrosion resistance, oxidation solutions for organic substances, sterilization solutions. Good resistance to atmospheric corrosion and dyes. Pitting and crevice corrosion occur in the presence of hot chloride solutions, when the temperature exceeds...60°C Stress corrosion may occur. They are not resistant to sulfuric acid solutions. |
Certification | ISO 9100;2008SGS |
Packaging | Boxes, cartons, wooden pallets |
AISI 201 Stainless Steel | |||||||||
Material Standards | Chemical Composition (%) | Hardness (measured on parallel planes)HRC） | |||||||
C | SI | Mn | P | S | Ni | Cr | Mo | ||
AISI 201 | 0.15 | ≤1.00 | ≤5.5-7.5 | ≤0.06 | ≤0.03 | 3.05-5.5 | 16-18 | - | HRC≤26 |
Dimensions:2.381-12.7mm Precision Grade: G100-G1000 | |||||||||
Product | |
Materials | Stainless steel304 |
Grade | G100-G1000 |
Surface | Zero defects, clean |
Dimensions | 2.381-12.7mm |
Samples | Free Samples |
Applied | Special bearings and pumps, aerosol pumps, gardening and household sprayers, perfume micro-pumps, seals, application valves, agricultural backpack sprayers. They are used in the food, aerospace, and military industries. |
Features | Unhardened Austenitic stainless steel balls, which exhibit excellent mechanical properties, toughness, and corrosion resistance.AISI 304L Offer lower carbon content.AISI 302Enhanced mechanical properties. Balls provided in a passivated state. |
Corrosion resistance | Excellent corrosion resistance, resistant to oxidizing solutions for organic substances, sterilization solutions. Good resistance to atmospheric corrosion and dyes. They are susceptible to pitting and crevice corrosion in the presence of hot chloride solutions, when the temperature exceeds...60°C Stress corrosion may occur. They are not resistant to sulfuric acid solutions. |
Certification | ISO 9100;2008SGS |
Packaging | Boxes, cardboard boxes, wooden pallets |
Material
AISI 304 & 304L Stainless Steel | |||||||||
Material Specifications | Chemical Composition (%) | Hardness (measured on parallel planes)HRC） | |||||||
C | SI | Mn | P | S | Ni | Cr | Mo | ||
AISI 304L | ≤0.03 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 8-10.5 | 16-18 | - | HRC≤26 |
AISI 304 | ≤0.07 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 8-10 | 17-19 | - | |
Dimensions:2.381-12.7mm Precision Grade: G100-G1000 | |||||||||
Product | |
Materials | Stainless steel316 |
Grade | G100-G1000 |
Surface | Zero defects, clean |
Dimensions | 2.381-12.7mm |
Samples | Free Samples |
Application | Photography equipment, quick connectors, ball joints, ink cartridges, jewelry, special bearings, pumps and valves, aerosol and sprayer distributors. For food, papermaking, chemicals, rubber, military, and textile industries. |
Features | Austenitic stainless steel steel balls have superior corrosion resistance toAISI 304 Steel balls. They exhibit excellent toughness.AISI 316L Low carbon content (highest)0,030%The ball is supplied in a passivated state. |
Corrosion resistance | Excellent corrosion resistance, with good resistance to organic substances (acetic acid, phosphoric acid, sulfuric acid). Pitting and crevice corrosion may occur in the presence of hot chloride solutions, when the temperature exceeds...60°C Stress corrosion can occur. They do not resist contact with hydrochloric acid, hydrofluoric acid, aqua regia, iron, and magnesium chloride. |
Certification | ISO 9100;2008SGS |
Packaging | Boxes, cardboard boxes, wooden pallets |
Materials
AISI 316 & 316L Stainless Steel | |||||||||
Material Specifications | Chemical Composition (%) | Hardness (measured on parallel planes)HRC） | |||||||
C | SI | Mn | P | S | Ni | Cr | Mo | ||
AISI 316L | ≤0.03 | ≤1.00 | ≤2.00 | ≤0.035 | ≤0.03 | 12-15 | 16-18 | 2.0-3.0 | HRC≤26 |
AISI 316 | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.035 | ≤0.03 | 10-14 | 16-18 | 2.0-3.0 | |
Dimensions:2.381-12.7mm Precise Grade: G100-G1000 | |||||||||
