The Mobile Grab Bucket Cleaning Machine is primarily used for removing coarse floating debris from water, such as trees, weeds, garbage, fibers, and rubber-plastic materials. This grate cleaning machine is suitable for the inlets and outlets of large and medium-sized structures, including flood prevention pump stations, sewage and rainwater lifting pump stations, power plants, and wastewater treatment plants, to ensure smooth water intake and protect the pump impeller. It reduces the workload of subsequent process handling and is an ideal cost-effective product. The Gate-Type Mobile Grab Bucket Cleaning Machine consists of four main parts: the grab bucket unit, the gantry crane, the guide rail, and the underwater grate. The grab bucket unit consists of two buckets, made of stainless steel with a movable hinge in the middle, connected to the upper part by an engineering oil cylinder, which allows the buckets to close when oil is applied. The cleaning section includes a lifting device composed of steel cables, drums, and a motor reducer, as well as an oil tank and telescopic oil tube drums. The traveling guide rail is composed of rectangular long guide rails and arrays of支柱 supporting the suspended guide rail. The gantry crane is mainly composed of a gantry, walking end beam, and walking mechanism. Key Features: The Gate-Type Mobile Grab Bucket Cleaning Machine breaks with traditional coarse grate designs and incorporates many new technologies. The equipment is mainly composed of the gantry crane and the grab bucket unit, with one machine capable of serving multiple grates. Limit switches are installed on the traveling guide rail to ensure the crane stops accurately at each cleaning point. The unique design of the cleaning process allows the grab bucket to closely mesh with the grate bars, thus removing hair-like debris and entanglements around the grate. The grated platform remains very clean as the track spans over the intake area. All control cables are also laid out along it, resulting in an overall very clean appearance. The lifting and lowering of the grab do not require any track devices, thereby reducing energy loss caused by friction. Due to the high level of electrical control and the simple mechanical structure, the equipment is highly stable, easy to maintain, and has a low maintenance volume. The污水-type grab bucket features a back net structure, which, while intercepting many large debris, also removes fine suspended particles, significantly reducing the workload of the subsequent fine grate. Product Advantages: Due to the unique structure and the latest technology of the Gate-Type Mobile Grab Bucket Cleaning Machine, it offers the following advantages: - High adaptability: Suitable for any complex water quality, capable of handling various large debris, extensive waterweeds, and debris. - Large handling capacity: The bucket has a large capacity, able to lift hundreds of kilograms of various waste in one go. - Wide operational area: One machine can clear multiple grates, cleaning the entire grate from top to bottom. - Large grab depth: Can reach up to 75 meters deep in waste, with no limit on width. - Good structural performance: The bucket operates up and down without guides, with no friction and low energy consumption. - High level of automation: The entire process is fully automated through a PLC touch screen, achieving unattended operation. - Long service life: No permanent immersion parts, no friction, few failures, and a low maintenance volume. - Good working environment: Waste is directly placed in the discharge area, no conveying equipment is needed, an open platform, clean and tidy. - Low civil engineering investment: Adaptable to various sites and spaces, with low civil engineering requirements and cost. - Excellent cost-performance ratio: One machine can replace several traditional grate cleaning machines.