New Climbing Training Tower - 1. The size of the training tower window is 1.2m x 1.8m, with a minimum distance of 0.65m from the tower edge. The window sill width is 0.35m.

Window sill plate thickness: 0.05 (protruding 5 cm from the tower wall), the height from the sill to the floor of each level is 0.8 meters, the height of each level is 3.5 meters, and it should have a clear width of not

Staircase with a height less than 0.9 meters, with handrail tube diameter not less than 0.026 meters. The height of the inner staircase handrail is 1.1 meters. 2. On each floor of the training tower, the inside should have...

Please install a platform with a width of not less than 1.5 meters and set a railing on the top level. 3. Install an outdoor fire ladder in the training tower. The ladder should extend to the top of the tower, with an appropriate width that is not too narrow.

At 50 cm. Training Tower Description: 1. Mainly composed of (1) simulated windows, (2) floor partitions, (3) rear supports, and (4) observation and command platform framework.

Consisting of the main steel structural frame and the like. Floor separators (steel plates) are installed between the upper and lower adjacent simulated windows. 2. Below the rear of the tower, there is a separator.

Corresponding rear frame for the simulated window. 3. The simulated window, floor partition, rear frame, and main frame are bolted together for integration. 4. The layers are interconnected.

Each level is connected by stairs. 5. The upper part of the tower is equipped with observation and command platforms.