New Climbing Training Tower - 1. The size of the training tower window is 1.2m x 1.8m, and the distance from the window to the tower edge must be no less than 0.65m, with a window sill width of 0.35m.

Window sill board thickness: 0.05 (protruding 5 cm from the tower wall), the height of each window sill from the floor level of that floor is 0.8 meters, the floor height is 3.5 meters, and it should have a clear width of not less than:

Staircase with a height less than 0.9 meters, with a handrail tube diameter of not less than 0.026 meters. The handrail height of the inner staircase is 1.1 meters. 2. On each floor inside the training tower, a handrail should be installed.

Install a platform no less than 1.5 meters wide, with a railing on the top level. 3. Set up an outdoor fire escape ladder in the training tower. The ladder should lead to the top of the tower, and the width should not be less than...

At 50 cm. Training Tower Description: 1. Mainly composed of (1) simulated windows, (2) floor partitions, (3) rear supports, and (4) observation and command platform framework.

And consists of the main steel structural frame, etc. Floor partitions (steel plates) are installed between the upper and lower adjacent simulated windows. 2. Below the rear of the tower, there is a partition with the model.

Corresponding rear frame for simulated windows. 3. The simulated windows are bolted together with the floor partition, rear frame, and main frame. 4. Layers are interconnected.

Each level is connected by stairs. 5. The upper section of the tower is equipped with observation and command platforms.