New climbing training tower - 1. The size of the training tower window is 1.2m x 1.8m, with a minimum distance of 0.65m from the tower edge. The window sill width is 0.35m.

Window sill thickness: 0.05 (protruding 5 cm from the tower wall), the height from the sill to the ground level of each floor is 0.8 meters, the floor height is 3.5 meters, and it should have a clear width of not less than:

Staircase with a height under 0.9 meters, handrail tube diameter not less than 0.026 meters. Handrail height for the internal staircase is 1.1 meters. 2. On each floor of the training tower, an internal handrail should be installed.

Install a platform not less than 1.5 meters wide, with a railing on the top level. 3. Set up an outdoor fire ladder in the training tower. The fire ladder should extend to the top of the tower, and the width should not be less than...

At 50 cm. Training Tower Instructions: 1. Mainly composed of (1) simulated windows, (2) floor partitions, (3) rear racks, (4) observation and command platform framework.

Composed of the main steel structural frame, etc. Floor partition panels (steel plates) are installed between the upper and lower adjacent simulated windows. 2. Below the rear of the tower, there is a partition with the model.

Corresponding rear frame for the simulated window. 3. The simulated window, floor partition, rear frame, and main frame are bolted together for integration. 4. The layers are interconnected.

Each floor is connected by stairs. 5. The upper part of the tower is equipped with observation and command platforms.