New climbing training tower model - 1. The size of the training tower window is 1.2m x 1.8m, and the distance from the window to the tower edge must be no less than 0.65m, with a window sill width of 0.35m.

Window sill board thickness: 0.05 (protruding 5 cm from the tower wall), the height from the sill to the ground level of each floor is 0.8 meters, the height of each floor is 3.5 meters, and it should have a clear width of not less than:

Staircase with a height less than 0.9 meters, with handrail tubes having a diameter of not less than 0.026 meters. The height of the inner staircase handrail is 1.1 meters. 2. Inside each level of the training tower should be equipped with...

Install a platform with a width of no less than 1.5 meters, and a railing should be set on the top level. 3. Set up an outdoor fire ladder in the training tower. The ladder should extend to the top of the tower, and the width should not be less than...

At 50 centimeters. Training Tower Instructions: 1. Mainly consists of (1) simulated windows, (2) floor partitions, (3) rear racks, and (4) observation and command platform frame.

And consists of the main steel structural frame, etc. Floor partitions (steel plates) are installed between the upper and lower adjacent simulated windows. 2. Below the rear of the tower, there is a partition with the model.

Corresponding rear frame for the simulated window. 3. The simulated window, floor partition, rear frame, and main frame are bolted together for integration. 4. The layers are...

Each floor is connected by stairs. 5. The upper part of the tower is equipped with observation and command platforms.