Application Range
　　
Used for long-term static hydrostatic test and burst test of thermoplastic pipes, fittings, and composite pipes.
　　
Applicable materials include PE, PVC, PP-R, PP-B, PP-A, PE-X, PVC-U, PVC-C, and aluminum-plastic composite pipes, as well as various types of piping.
　　
Standard of Execution
　　
GB/T6111, GB/T15560, GB/T18742.1, GB/T13663, GB/T18992.2, ISO 1167, ASTM D1598, 1599, etc.
　　
　　
　　
I. Test Host Section

Technical Specifications

Pressure Display Accuracy: 0.001 MPa

Pressure Control Accuracy: -1% ~ +2%

Operating Pressure: 0.01 MPa ~ 0.3 MPa, 0.4 MPa ~ 10 MPa, 0.4 MPa ~ 25 MPa.

Timer Operating Time: 1s ~ 9999h

Timer Display Accuracy: 1s

Number of Test Workstations: 1~40 options

Product Features

Each channel displays peak pressure and pressure increase curve in real-time.

Each work station has an independent control unit, with no interference between them.

Each workstation displays the testing process individually, with two curves for pressure and temperature.

Each main unit can connect to two constant-temperature water tank temperature signals simultaneously.

Data storage after equipment power-off, and automatic restart to continue the last test upon power return

With water filter unit, reducing pipeline blockage failures

Low noise, quick response, and stable pressure.

Part II: Constant Temperature Water Tank Section

Technical Specifications
1. Temperature Control Range: Room temperature - 95°C, 15°C - 95°C (optional refrigeration control system)
2. Temperature Control Accuracy: ±0.1℃
3. Uniformity of temperature field: ±0.5℃
4. Applicable Sample Range: φ16mm - φ1200mm
Material: Both inner and outer shell are made of 304 stainless steel
Product Features
HWX250 and above specifications water tanks are pneumatically operated.
Thermal insulation thickness not less than 80mm, with minimal temperature loss.
Overflow Device
Steam Collection Unit (Optional)
Over-temperature protection feature
Temperature control signal enters the test mainframe
　　
Section 3: Part of Type A Jig

Technical Specifications
Clamping Material: 304 Stainless Steel / Zinc-Coated Carbon Steel
　　
　　
Clamping Specifications: φ16mm - φ2000mm
End Seal Structure: Type A
Product Features
Pot-type sealed structure, O-ring made of silicone seal
Aesthetically pleasing and well-proportioned design, surface sandblasting treatment
Large-scale fixtures are forged for sharp, non-detaching clamping teeth.
Customizable size for the inlet thread
British-standard fixtures for forging, customizable