Non-flammable c40 cement mortar, explosion-proof and non-sparking concrete manufacturer

With the rapid advancement of science, the construction industry's demands for the ground are also increasing, especially for flammable, explosive, and fire-resistant areas.

Flammable goods storage, electronic workshops, areas prone to sparks, military supplies or explosive factories, aircraft hangars, textiles, pulp, printing plants, warehouses, dock loading areas, machinery factories, aircraft parking areas, parking lots, fuel storage facilities, corridor floors, industrial chutes, bridge surfaces, reservoir spillways, energy dissipation pools, loading ramps, enterprises, textile industry, cold storage facilities, automotive industry, electronics industry, highways, and other surfaces also use, explosion-proof, wear-resistant, non-sparking, high strength, easy to install. Beijing Shunjian Xingye Engineering Technology Co., Ltd. developed non-sparking cement mortar meets current construction and acceptance specifications.SJ/T 31469-2002Regulations on the Construction and Acceptance of Anti-static Floor and the Construction Quality Acceptance Standard for Building Floors, current provisions on non-igniting polished stone. Manufacturers of non-igniting fine sand concrete.

Composition of non-flammable cement mortar raw materials

1.The sand is made from dolomite, and it does not produce sparks when rubbed against hard objects such as metals (iron, copper, etc.).

2.Cement is made with special non-sparking cement, grade 42.5R.The above

3.Special Non-Fire-Starting Abrasion-Resistant Aggregate (Metallic Aggregate)

Above are the main components of non-sparking cement mortar, with special additives ensuring the mortar's strength, crack resistance, shrinkage-free, and bending resistance, as well as a non-sparking ground fine aggregate mortar.

Non-flammable cement mortar flooring features

1.After construction, metal objects do not produce sparks when rubbed against the ground.

2.High strength, high wear resistance, no shrinkage, high crack resistance, good bond with concrete

Non-flammable cement mortar construction plan

Firstly, prepare the subgrade concrete floor, ensuring no soil or debris is present. After cleaning, use a high-pressure water jet for rinsing. One day prior to construction, condition the subgrade concrete to ensure adequate moisture during the work. Locate the elevation marks.Tie lines can also be applied directly with mortar. Mix the mortar according to the water-cement ratio provided by Beijing Shunjian Xingye Engineering Technology Co., Ltd. for non-flammable cement mortar, apply the mud slurry (to ensure a more stable bond between the concrete and mortar surfaces), adjust the water-cement ratio on-site, and construct as conveniently as possible or reduce the water content. Lay the cement mortar surface layer, then use a trowel for leveling. Afterward, use a steel trowel for one-pass smoothing, followed by two and three more passes. Then, cure the surface, with a curing period of 7 days.Day (can also be cultivated at the construction site)24 hours, 2 hours of maintenance per dayNext.

Beijing Shunjian Xingye Engineering Technology Co., Ltd. produces non-sparking cement mortar that meets standard requirements and has been successfully applied in various projects such as fuel depots (Tianjin Dagang Oilfield, Dongying Shengli Oilfield), Beijing gas station renovations (Shanxi to Beijing Gas Pipeline Project), electronic workshops, storage warehouses, coal mine storage facilities, logistics warehouse flooring (Tianjin Port warehouse storage of paints and coatings), and other cases, gaining recognition from non-sparking wear-resistant flooring customers. Construction methods for fireproof and explosion-proof flooring mortar materials.

Surface Treatment

1Newly constructed industrial flooring requires certain maintenance before construction can begin, approximately 28...Day.

2Surface cement paste, old paint, and adhered debris.

3Surface oil stains, treat with K Oil King cleaner.

4Drainage and drying of damp areas.

5Surface cleaning must be done with a dust-free sweeper and a large vacuum cleaner.

6Flat surface allows gaps of 2~2.5mm., Moisture content at 6%Below, PH$6 to $80。

7The surface of the floor needs to be textured using a dust-free grinder and then cleaned with a vacuum cleaner.

8Fill holes and obvious dents on the floor surface with putty and scrape. After drying, sand and vacuum.

Two, leveling layer construction

Clean the leveling layer, ensuring that any floating dust or broken partition strips are swept clean. To ensure a strong bond between the surface mortar and the leveling layer.

Section 3: Static Dissipative Grounding Mesh for Inner Layer

Four20-30Thick, non-flammable mortar