C30 Non-flammable Fine Stone Concrete (Explosion-proof and fire-resistant mortar that does not spark)

With the rapid development of science, the construction industry has also raised its standards for the ground, demanding more from places prone to fire, explosion, and fire-resistant areas.

Flammable goods warehouses, electronic workshops, areas prone to sparks, munitions or explosive factories, aircraft hangars, textiles, pulp, printing plants, warehouses, port loading and unloading areas, machinery factories, aircraft parking areas, parking lots, fuel storage, walkways, industrial chutes, bridge surfaces, reservoir spillways, energy dissipation pools, loading ramps, enterprises, textile industry, cold storage facilities, automotive industry, electronics industry, highways, and other surfaces also use it. It is explosion-proof, wear-resistant, non-sparking, high in strength, easy to install, and the non-sparking cement mortar developed by Beijing Shunjian Xingye Engineering Technology Co., Ltd. meets current construction and acceptance specifications.SJ/T 31469-2002Current provisions on non-sparking terrazzo for the Construction and Acceptance Code for Floor Construction and the Construction Quality Acceptance Code for Building Floors. Manufacturer of non-sparking fine aggregate concrete.

Composition of non-flammable cement mortar raw materials

1.The sand is made from dolomite, and this sand will not produce sparks when rubbed against hard objects such as metals (iron, copper, etc.).

2.Cement is made with special non-flammable cement, grade 42.5R.The above

3.Special Non-Flammable Abrasion-Resistant Aggregate (Metal Aggregate)

The above lists the main components of non-sparking cement mortar. Additionally, special additives are used to ensure the mortar's strength, crack resistance, shrinkage-free property, and bending resistance, resulting in a non-sparking fine aggregate mortar for ground surfaces.

Non-flammable cement mortar flooring features

1.No sparks are produced when metallic objects rub against the ground after construction.

2.High strength, high wear resistance, no shrinkage, high crack resistance, good bond with concrete

Non-flammable cement mortar construction plan

Firstly, prepare the subgrade concrete floor, ensuring no soil or debris is present. After cleaning, use a high-pressure water jet for rinsing. Prior to construction, cure the subgrade concrete a day in advance to ensure sufficient moisture during the work. Locate the elevation mark.Stringing can also be done directly with mortar. Mix the mortar according to the water-cement ratio provided by Beijing Shunjian Xingye Engineering Technology Co., Ltd. for non-flammable cement mortar, apply the skim coat (to ensure a more stable bond between the concrete and mortar surfaces), adjust the water-cement ratio of the mortar on-site, and proceed with construction as convenient or reduce the water, lay the cement mortar surface layer, and then use a trowel to level it. Afterward, use an iron trowel for one pass, then two passes, and three passes for smoothing. Once completed, cure for 7 days.Day (can also be maintained at the construction site)Next day, 2 days of maintenanceNext.

Beijing Shunjian Xingye Engineering Technology Co., Ltd. produces non-sparking cement mortar that meets standard requirements and has been successfully applied in various projects such as fuel depot renovations (Tianjin Dagang Oilfield, Dongying Shengli Oilfield), Beijing gas station renovations (Shanxi-Jingjing Gas Pipeline Project), electronic workshops, storage warehouses, coal mine storage facilities, logistics warehouse floors (paint and coating storage at Tianjin Port warehouses), and other engineering cases, earning recognition from non-sparking, abrasion-resistant flooring clients. Fireproof and explosion-proof flooring mortar material construction method

Surface Treatment

1Newly constructed industrial flooring requires certain maintenance before construction can begin, approximately 28...Day.

2Surface cement laitance, old paint, and adhered debris.

3Surface oil stains should be treated with K Oil Remover.

4Drain excess water and dry the damp areas.

5Surface cleaning must be performed with a dust-free sweeper and a large vacuum cleaner.

6Flattened surfaces allow gaps of 2 to 2.5mm., moisture content of 6%Below, PH$6~$80。

7The surface roughening of the floor should be done with a dust-free grinder and then cleaned with a vacuum cleaner.

8Holes and obvious dents on the floor surface should be filled and scraped. After the material has dried, sand and vacuum the surface.

Two, leveling layer construction

Clean and level the base layer, ensuring all floating dust and broken partition strips are swept clean. To ensure a firm bond between the surface mortar and the leveling layer.

Section 3: Anti-static grounding metal mesh for the base interior

Four20-30Thick-set, non-flammable mortar