Static-dissipative non-flammable cement mortar, anti-static friction non-sparking flooring
1；3Anti-static Leveling Mortar Manufacturer；2Conductive surface layer mortar; Conductive floor mortar, antistatic floor mortar manufacturer
Specialty antistatic cement mortarIt is a special configuration from our company.Anti-static conductorCement mortar, pre-mixed powder at the factory, ready for direct use on site.Mix with water for useIt contains abrasion-resistant aggregates (pearlitic malleable cast iron and conductive materials), Lafarge (Portland cement), and additives to enhance construction performance. These metal aggregates and conductive materials are strictly graded and free of impurities. These components offer high conductivity and abrasion resistance.Conductive Phase Materials: Among various conductive materials, carbonaceous aggregates are suitable as aggregates for conductive mortars, which can either replace part of the aggregates or be added as a separate component. In the use of conductive phase materials, carbon fibers are typically directly mixed into the mortar as one of its components. Conductive fine aggregates, mainly including graphite, carbon black, and coke, are controlled by specific surface area for fineness. The ideal gradation of fine aggregates is determined through experiments, and the amount added is based on the required conductivity. Graphite has high strength but cannot be formed into an ideal gradation and has a relatively high resistivity. In contrast, coke has the advantages of low resistivity, light weight, and low cost. Although it has a certain porosity and water absorbency, the water absorption rate is stable and does not cause expansion after absorption, making it an ideal conductive phase. Its drawback is its relatively low inherent strength. Steel fibers and iron ore can also be used as conductive phase aggregates.
1；3Anti-static cement mortarLeveling layerPerformance Features:
Special antistatic cement mortar (flooring) has excellent conductivity against static electricity. When grounded properly, the malleable metallic aggregates and conductive materials within the material provide the ground with high antistatic spark prevention and conductivity, allowing the static electricity on the ground to be conducted.
Conductivity Index:1.0×105Ω—1.0×109Ω。
Under actual construction moisture conditions, curing28The tensile strength of the天后 can reach up to 100N.／mm2
Special antistatic cement mortar (flooring) treated concrete surfaces exhibit higher wear resistance compared to untreated surfaces.3Multiple.
Bonding strength, directly bonds to various new and old concrete surfaces.
Rush schedule: Construction48After an hour, it can be used normally. Manufacturers can be specially formulated to meet customer needs.Within an hour.
High oil and water resistance, with waterproof and moisture-proof properties.
Bright surface color, available in various colors upon customer's request.
1；2Surface LayerAnti-static cement mortarApplication Range:
Flammable goods warehouses, electronic workshops, areas prone to sparks, military supplies or explosive factories, aircraft hangars, textiles, pulp, printing plants, etc., where static electricity may occur.
Static Dissipation and Anti-Static Shock: Use conductive mortar (anti-static mortar) as a structure for dissipating stray currents
Specialty antistatic cement mortarPlease provide the Chinese content to be translated.Quantity:
Construction Quantity:0.8--1kg／mm
Construction Points: Install a guide grid (copper mesh is ideal) and grounding system before construction.Anti-static Cement Floor Installation Method
Abrasion-resistant, static-dissipative cementitious flooring types include:3Layer, according to specification requirements, it is recommended to use 4~6mmReinforcing steel woven into a mesh, spaced 200cm apart.×200cmBury it in the general cement mortar, then pour 20cm of cement mortar on top.Wear-resistant cement concrete with even thickness on both sides, with a measured addition of diamond sand. The mix ratio for ordinary cement mortar has no special requirements; the amount of diamond sand added to the wear-resistant cement concrete is approximately 10%.Every 10 to 15 meters as required.Extract a grounded wire from the internet, with the terminal set on the wall and the terminal block located 20~30 meters from the ground level.At the top.
Construction Steps; Ground Cleaning, Apply Primer, Laying1 & 3 Leveling anti-static mortar, lay grid (square in Fanggezhuang, fishbone shape), ensure grounding, then lay 1 & 2 surface anti-static mortar. Produce smooth finish.
To save costs for our clients, we have newly developed a special anti-static cement mortar. For details, please contact us directly!
1；3Anti-static Leveling Mortar Manufacturer；2Conductive surface mortar; Conductive floor mortar, anti-static flooring mortar manufacturer
Special Antistatic Cement Mortar is a specialized electroconductive cement mortar formulated by our company, available as a pre-mixed powder that can be directly mixed with water on-site. It contains wear-resistant aggregates (martensitic ductile cast iron and conductive materials), Lafarge (Portland cement), and additives to enhance construction performance. These metal aggregates and conductive materials are strictly graded and free of impurities. These components offer high conductivity and wear resistance. Conductive phase materials: Among various conductive materials, carbon aggregates are suitable as aggregates for conductive mortar, either partially replacing other aggregates or as a separate component. When used as conductive phase materials, carbon fibers are often directly mixed as a component of the mortar. Conductive fine aggregates mainly include graphite, carbon black, and coke, with fineness controlled by specific surface area. The ideal grading of fine aggregates is determined through experimentation, with the amount added based on the required conductivity. Graphite has high strength but cannot be graded ideally and has relatively high resistivity. In contrast, coke has the advantages of low resistivity, light weight, and low cost. Although it has some porosity and water absorption, the water absorption rate is stable, and it does not expand upon absorption, making it an ideal conductive phase. Its drawback is its lower inherent strength. Steel fibers and iron ore can also be used as conductive phase aggregates.
1；3Anti-static cement mortar leveling layer performance features:
Special anti-static cement mortar (flooring) has excellent conductivity against static electricity. When grounded properly, the malleable metallic aggregates and conductive materials within the material provide the floor with high anti-static spark prevention and conductivity, allowing for the conduction of static electricity on the floor.
Conductivity Index Value:1.0×105Ω—1.0×109Ω。
In the actual construction moisture conditions, curing28The compressive strength of the天后 can reach 100N.／mm2
Special anti-static cement mortar (flooring) treated cement surfaces are more wear-resistant than untreated surfaces.3Multiple.
Bonding strength, directly adheres to various new and old concrete floor surfaces.
Rush project timeline: Construction48After an hour, it's ready for normal use. Manufacturers can customize according to customer needs.Within an hour.
High oil and water resistance, waterproof and moisture-proof properties.
Bright surface colors available, customizable to various colors as per customer requirements.
1；2Surface anti-static cement mortar application scope:
Flammable goods warehouses, electronic workshops, areas prone to sparks, military supplies or explosive factories, aircraft hangars, textiles, pulp, printing plants, and other areas with static electricity.
Static Dissipation and Electrostatic Shielding: Use conductive mortar (anti-static mortar) as a structure for preventing stray currents
Specialty anti-static cement mortarQuantity:
Construction Consumption:0.8--1kg／mm
Construction Key Points: Install a grounding grid (copper mesh preferred) and grounding system prior to construction. Method for constructing static-proof cement flooring.
Abrasive-resistant cementitious antistatic flooring is divided into3Layer, as per specification requirements, it is recommended to use 4~6mmReinforcing bars woven into a mesh, spaced 200cm apart×200cmBury it in the general cement mortar, then pour another 20cm of mortar on top.Wear-resistant cement concrete with even thickness, with a measured addition of diamond sand. There are no special requirements for the mix ratio of ordinary cement mortar; the amount of diamond sand added to the wear-resistant cement concrete is approximately 10%.Every 10 to 15 meters as required.A grounded wire is extracted from the network, with the terminal set on the wall and the connection column located 20~30 meters from the ground level.Above.
Construction Steps; Ground Cleaning, Application of Primer, Laying1；3Leveling anti-static mortar, lay a grid (square at Fanggezhuang, fishbone shape), ensure grounding, then lay 1；2Anti-static surface mortar. Smooth finish.
To save costs for our clients, we have newly developed a special anti-static cement mortar. For details, please contact us directly.
