Self-compacting micro-expansive grouting material - C60 early strength pressure grout supplier
Non-shrink grouting material is made by using cement as the binder, supplemented with high fluidity, slight expansion, and anti-segregation materials. It can be used by adding a certain amount of water at the construction site, mixing it thoroughly. The grouting material features good self-leveling, rapid hardening, early strength, no shrinkage, slight expansion, non-aging, resistance to water quality and surrounding environment, good self-sealing properties, and anti-rusting. It offers reliable quality, cost reduction, shortened construction period, and ease of use to the construction party. It fundamentally alters the stress condition of the equipment base, allowing it to uniformly bear the full load of the equipment, thereby meeting the installation requirements of various machinery and electrical equipment (heavy equipment). It is the ideal grouting material for the era of non-support installation.
Product Features
Primarily used for: anchor bolt installation, emergency repairs on airport runways, fixing of nuclear power equipment, reinforcement of road and bridge projects, machine bases, steel structures and foundation sockets, secondary grouting of equipment foundations, embedded reinforcement bars, reinforcement and retrofitting of concrete structures, crack treatment in old concrete structures, installation of mechanical and electrical equipment, track and steel structure installation, static pile engineering pile sealing, building reinforcement, increased cross-sections of beams and columns, thickening of wall structures and leak-proofing, grouting for various foundation project collapses, and various emergency repair projects. Stainless Steel Reinforcement
For bending, shearing, and tensile stresses in beam, slab, and column components primarily subjected to static loads, as well as for column reinforcement against compression. If used for beam and slab reinforcement against compression or for components with significant dynamic loads, additional anchoring measures should be added; for example, every100mmSet up2Anchor bolts for grouting or tensioning through beams and plates. Suitable for reinforcing beams, slabs, and columns against bending, shearing, and tensile forces, as well as for reinforcing components with significant dynamic loads. Applicable range is the same as (AFor components requiring a significant increase in load-bearing capacity.
Application Scope
Ideal for anchoring new and old members subjected to bending, shearing, compression, and tension. Chemical grouting for crack reinforcement restores the integrity and functionality of cracked concrete and masonry members, blocks medium penetration, and repairs and reinforces holes, pits, and insufficient cross-sections in concrete and masonry components. Suitable for reinforcing beams and slabs against bending and tension. Cross-sectional reinforcement, suitable for structures requiring increased self-weight, cross-sectional area, and aesthetic changes.
Product Categories
1主要用于: foundation bolt anchoring, reinforcement cutting, and grout layer thickness30mm<δ<200mmThe secondary grouting of equipment foundations based on the initial equipment foundation. For equipment foundations with oil resistance requirements, the secondary grouting is referred to as ordinary grouting material.
2主要用于: Grouting layer thickness≥150mmEquipment foundation secondary grouting. Reinforcement and strengthening (repair thickness) of the building's beams, slabs, columns, foundations, and ground floors.≥40mmEquipment foundation secondary grouting with oil-resistant requirements, referred to as reinforcement work Grouting material.
3主要用于: Prestressed duct grouting, grouting layer thickness10mm<δ<150mmEquipment secondary grouting, concrete beam column reinforcement angle steel and concrete gap grouting, referred to as concrete gap grouting Grouting material.
4Primarily used for: installation of large and complex equipment; reinforcement and reconstruction of concrete structures; road surface rapid setting, shrinkage-free grouting material.
5主要用于: High-temperature environments Grouting material, high temperature accumulation stability, good thermal shock resistance, equipment long-term at high radiation temperature500°C environment, grouting layer thickness30mm<δ<200mmThe secondary grouting of the equipment foundation is referred to as heat-resistant grouting material.
6Primarily used for: Short construction time.2Hourly IntensityC20Ready-to-run equipment, grouting layer thickness30mm<δ<200mmRush-pouring project to expedite construction schedule, referred to as emergency repair work Grouting material.
7主要用于: filling requirements for large-volume, tall, and complexly structured equipment, ensuring no dead corners in the filled areas. Offers excellent stability, suitable for special large-scale heavy-duty equipment. Grouting material, designated equipment, extra-large heavy-duty machinery Grouting material.
8主要用于: rapid strength gain under sub-zero temperatures, unaffected by frost damage, anchoring ground bolts, embedding reinforcing bars, and grouting layer thickness30mm<δ<200mmEquipment foundation secondary grouting with oil resistance requirements, referred to as frost-proof grouting material.
