Hebei Static-Dissipative Mortar Supplier - Non-Flammable Conductive Concrete Price

1；3Anti-static leveling mortar manufacturer1；2Conductive surface layer mortar; Conductive floor mortar, antistatic floor mortar manufacturer

Special anti-static cement mortarIt is configured by our company.Static DissipativeCement mortar, pre-mixed powder at the factory, ready for direct use on-site.Mix with water and stirIt contains abrasion-resistant aggregates (martensitic malleable cast iron and conductive materials), Lafarge (Portland cement), and additives for enhancing construction performance. These metal aggregates and conductive materials are strictly graded and free of impurities. These components offer high conductivity and abrasion resistance.Conductive phase materials: Among various conductive materials, carbonaceous aggregates are suitable as aggregates for conductive mortar, which can replace part of the aggregates or be added as a separate component. When used as conductive phase materials, carbon fibers are typically added directly as a component of mortar. Fine aggregates for conductive mortar mainly include graphite, carbon black, and coke, with fineness controlled by specific surface area. The ideal gradation of fine aggregates is determined through experimentation, and the amount added is determined by the required conductivity. Graphite has high strength but cannot be produced in an ideal gradation and has a relatively high resistivity. In comparison, coke has the advantages of low resistivity, light weight, and low cost. Although it has a certain porosity and water absorption, the water absorption rate is stable, and the volume does not expand after absorption, making it an ideal conductive phase. Its drawback is its low inherent strength. Steel fibers and iron ores can also be used as conductive phase aggregates.

1；3Anti-static cement mortarLeveling layerPerformance Features:

Special antistatic cement mortar (flooring) has excellent conductive properties against static electricity. When properly grounded, the malleable metallic aggregates and conductive materials within the material provide the ground with high resistance to static spark generation and conductive capability, enabling the conduction of static electricity on the floor.

Conduction Index Value:1.0×105Ω—1.0×109Ω。

In actual construction, the moisture content of the curing process28The compressive strength of the天后 can reach100N／mm2

Special anti-static cement mortar (flooring) treated concrete surfaces have higher wear resistance than untreated surfaces.3Multiple.

Bonding strength, directly adheres to all types of new and old concrete surfaces.

Rush project: Construction48After an hour, it can be used normally, manufacturers can be specially formulated according to customer requirements.3Within an hour.

High oil and water resistance, with waterproof and leakage prevention properties.

Vivid surface color, available in various colors upon customer's request.

1；2Surface LayerAnti-static cement mortarApplication Scope:

Flammable goods warehouses, electronic workshops, areas prone to sparks, military supplies or explosive factories, aircraft hangars, textiles, pulp, printing plants, and other areas with static electricity.

Static Dissipation and Antistatic: Utilize conductive mortar (antistatic mortar) as a structure for preventing stray currents

Specialty antistatic cement mortarPlease provide the Chinese content that needs to be translated into American English.Quantity:

Construction Consumption:0.8--1kg／mm

Construction Key Points: Install a guide grid (copper grid is ideal) and grounding system prior to construction.Anti-static Cement Floor Installation Method

Abrasive-resistant cementitious antistatic flooring is divided into3Layer, as per specification requirements, it is recommended to use4~6mmThe steel bars are woven into a steel mesh, spaced at200cm×200cmBury it in the general cement mortar, then pour over it with more general cement mortar.20cmWear-resistant concrete with even thickness on both sides, with a measured addition of diamond sand. No special requirements for the mix ratio of ordinary cement mortar; the amount of diamond sand added to the wear-resistant concrete is approximately10%As required, every10~15mExtract a grounding wire from the internet, with the wire terminal mounted on the wall and the connector located at a distance from the ground level.20~30mAbove.

Construction Steps; Ground Cleaning, Apply Bonding Agent, Lay Out1;3 Leveling anti-static mortar, lay grid (square at Fanggezhuang, fishbone shape), ensure grounding, then lay 1;2 surface anti-static mortar. Produce smooth finish.

To save costs for our clients, we have newly developed a special anti-static cement mortar. For details, please contact us directly!

1；3Anti-static leveler mortar manufacturer1；2Conductive surface mortar; conductive floor mortar, antistatic flooring mortar manufacturer

Special anti-static cement mortar is a special electrostatic-conductive cement mortar formulated by our company, available as a pre-mixed powder that can be directly mixed with water on-site. It contains abrasion-resistant aggregates (pearlitic malleable cast iron and conductive materials), Lafarge (Portland cement), and additives to enhance construction performance. These metal aggregates and conductive materials are strictly graded and free of impurities. These components possess high conductivity and abrasion resistance. Conductive phase material: Among various conductive materials, carbon aggregates are suitable as aggregates for conductive mortar, either partially replacing other aggregates or added as a separate component. When used as conductive phase material, carbon fiber is often directly mixed into the mortar. Conductive fine aggregates mainly include graphite, carbon black, and coke, with fineness controlled by specific surface area. The ideal grading of fine aggregates is determined through experimentation, with the amount added based on the required conductivity. Graphite has high strength but cannot be ideally graded and has a relatively high resistivity. In contrast, coke has the advantages of low resistivity, light weight, and low cost. Although it has a certain porosity and water absorption, the water absorption rate is stable, and the volume does not expand upon absorption, making it an ideal conductive phase. Its drawback is its low inherent strength. Steel fibers and iron ore can also be used as conductive phase aggregates.

1；3Anti-static cement mortar leveling layer performance characteristics:

Special anti-static cement mortar (flooring) has excellent conductivity against static electricity. When grounded properly, the malleable metallic aggregates and conductive materials within the material provide the floor with high anti-static spark prevention and conductivity, allowing for the conduction of static electricity on the floor.

Conductivity specification value:1.0×105Ω—1.0×109Ω。

In the actual construction moisture condition, curing28Tianhou's compressive strength can reach100N／mm2

Special anti-static cement mortar (flooring) treated concrete surfaces are more wear-resistant than untreated surfaces.3Multiple.

Bonding strength, directly adheres to various new and old concrete floor surfaces.

Rush project: Construction48After an hour, it can be used normally; manufacturers can be specially formulated according to customer needs.3Within an hour.

High oil and water resistance, waterproof and impermeable properties.

Bright surface color, available in various colors to meet customer requirements.

1；2Surface static-dissipative cement mortar application scope:

Flammable goods warehouses, electronic workshops, areas prone to sparks, military supplies or explosive factories, aircraft hangars, textiles, pulp, printing plants, and other regions with static electricity.

Static Dissipation and Antistatic: Use conductive mortar (anti-static mortar) as a structural anti-stray current system

Specialty anti-static cement mortar for use in electronics manufacturingQuantity:

Construction Consumption:0.8--1kg／mm

Construction Key Points: Install a grounding grid (copper mesh is ideal) and grounding system before construction.静电 dissipative concrete floor construction method

Abrasive-resistant cementitious antistatic flooring types include:3Layer, in accordance with the specification requirements, it is recommended to use4~6mmReinforcing steel woven into a steel mesh, spaced at200cm×200cmBuried within the general cement mortar, then topped with more cement mortar.20cmWear-resistant cement concrete with even thickness, with a measured addition of diamond sand. There are no special requirements for the mix ratio of common cement mortar; the amount of diamond sand added to the wear-resistant cement concrete is approximately:10Please return every so often as required.10~15mA grounded wire is extracted from the internet, with the terminal set on the wall and the connector located at a distance from the ground level.20~30mAbove.

Construction Steps; Ground Cleaning, Apply Primer, Lay Down1；3Leveling antistatic mortar, lay grounding grid (square at Fanggezhuang, fishbone shape), ensure grounding, then lay1；2Anti-static surface砂浆. Smooth finish.

To save costs for our customers, we have newly developed a special anti-static cement mortar. For details, please contact us directly.