New climbing training tower - 1. The size of the training tower window is 1.2m x 1.8m, with a minimum distance of 0.65m from the tower edge. The window sill width is 0.35m.

Window sill thickness: 0.05 (protruding 5 cm from the tower wall), the height from the sill to the ground level of each floor is 0.8 meters, the floor height is 3.5 meters, and there should be a clear width of not

Staircase with a height under 0.9 meters, with a handrail tube diameter of not less than 0.026 meters. The height of the handrail on the inner staircase is 1.1 meters. 2. On each floor of the training tower, an inner handrail should be installed.

Please install a platform not less than 1.5 meters wide, and a railing should be set on the top level. 3. The training tower should be equipped with an outdoor fire escape ladder. The fire escape ladder should extend to the top of the tower, and the width should not be less than...

At 50 cm. Training Tower Description: 1. Mainly consists of (1) simulated windows, (2) floor partitions, (3) rear supports, (4) observation and command platform frame

The main steel structural frame and other components are included. Floor decks (steel plates) are installed between the upper and lower adjacent simulated windows. 2. At the bottom of the tower body, there is a structure in the rear that corresponds to the model.

Corresponding rear frame for the simulated window. 3. The simulated window, floor partition, rear frame, and main frame are connected together as a unit using bolts. 4. The layers are interconnected.

Each floor is connected by stairs. 5. The upper part of the tower is equipped with observation and command platforms.