FRP Valve Insulating Cover FRP Valve Insulating Shell Manufacturer

The relative density is between 1.5 to 2.0, just 1/4 to 1/5 of carbon steel, yet the tensile strength is close, even exceeding carbon steel, and the specific strength can rival that of alloy steel. Therefore, it is effective in applications requiring weight reduction, such as in aviation, rocketry, spacecraft, high-pressure vessels, and other products where weight is a concern. Some epoxy FRPs can achieve tensile, bending, and compressive strengths over 400 MPa. FRP is an excellent corrosion-resistant material, with good resistance to atmospheric conditions, water, and general concentrations of acids, bases, salts, as well as various oils and solvents. It has been applied in all aspects of chemical corrosion protection and is replacing carbon steel, stainless steel, wood, non-ferrous metals, and more.

Installation Method:

Inspect valves and pipeline protection to ensure they meet installation requirements.

2. Inspect the exterior of the protective case for any damage.

3. Measure the interface dimensions and draw the outline on the protective case shell.

4. Cut along the contour line, then open the protective cover to trim any defects.

5. Place the protective sleeve over the valve to be protected, tighten the bolts, and complete the installation.