TIME3200 handheld roughness tester
Product Overview
This instrument is suitable for production sites and can measure the surface roughness of various machined parts. According to the selected measurement conditions, the computer calculates the corresponding parameters and displays all measurement results and graphics clearly on the LCD displayIt can also output on a printer and communicate with a PC.
Features
○ High precision inductive sensor
○ Measurable display of 13 roughness parameters
○ Using DSP (Digital Signal Processor) for data processing and control, fast speed and low power consumption
○ Mechatronics design, small size, light weight, easy to use
High quality lithium-ion rechargeable battery with high capacity, no memory effect, and continuous working time greater than 20 hours
○ Connected Era TA series printer, capable of printing measurement parameters and contours
○ Standard RS232 interface, can communicate with PC
○ Optional surface sensor for measuring surfaces, small hole sensor for measuring inner hole walls, groove/deep groove sensor for measuring the roughness of groove bottoms or steps
○ Menu operation mode
○ Has graphic display function
○ Sensor pin position indication
○ Automatic shutdown with storage function
○ Multi language working mode selection
Technical Specifications
measurement parameters | Ra、Rz、Ry、Rq、Rt、Rp、Rv、Rmax、R3z、RSk、RS、RSm、Rmr |
measurement range | Ra:0.025-12.5μm |
display range | Ra、Rq：0.005-16μm，Rz、Ry、Rt、Rp、Rv、Rmax、R3z：0.02-160μm，RS、RSm：1mm，Rmr：0-100（%Rt），Rsk：0-100 |
measurement range | ±20μm、±40μm、±80μm |
Zui High Display Resolution | 0.001μm |
Filtering method | RC、PC-RC、GAUSS、D-P |
Sampling length | 0.25mm、0.8mm、2.5mm、 automatic |
evaluation length | 1L-5L (optional), L is the sampling length |
Measure travel length | 3L-7L (optional) |
The maximum driving stroke length | 17.5mm/0.71inch |
Zui small drive stroke length | 1.3mm/0.052inch |
indication error | ≤±10％ |
Indication variability | ≤6％ |
Needle tip angle | 90° |
display mode | 128 × 64 dot matrix LCD (with backlight) |
working environment | temperature0 º C-40 º C, relative humidity:<90% |
weight | 440g |
Overall dimensions | 140×52×48mm |
Basic Configuration
HostTIMES100 standard sensor, power adapter, multi line template, sensor sheath, bracket
Optional Accessories
TIMES110 surface sensor TIMES120 pinhole sensor TIMEH13 groove sensor TIMES131 deep groove sensor, TA610 measurement platform, TA620 measurement platform, TA630 fine adjustment platform, TA631 fine adjustment platform, lateral adapter rod, extension rod, V-shaped block, connecting body component, driver connecting shaft, PC software
