Installation of central oxygen supply system engineering
Installation method of central oxygen supply system. What should we do if we make a mistake in the installation steps of the central oxygen supply system? Below, we will explain the installation method of the central oxygen supply system.
(1) Disassemble the high-pressure gauge of the oxygen flowmeter from the flowmeter.
(2) The high-pressure gauge end is connected to an externally threaded conical tube that is compatible with its thread, and the flow meter end is connected to an internally threaded conical tube that is compatible with its thread.
(3) Connect the conical tube at the high pressure gauge end and the flow meter end with a high pressure rubber tube, and tie it tightly with a thin iron wire. According to the bed settings, use three-way pipes to connect the flow meter to the head of the bed, and fix the rubber pipe to the wall. If two beds share the same flowmeter, the end of the humidification bottle can be distributed to the two beds through a Y-shaped tube (or on a stethoscope). If there are multiple beds, two oxygen cylinders can be connected in parallel.
(4) Twist the high-pressure gauge onto the oxygen cylinder and use it immediately
Further reading
Installation precautions for central oxygen supply system
The installation precautions for the central oxygen supply system include some situations that need to be understood during the process, which are closely related to the excessive losses of the central oxygen supply system So in order to reduce the losses of the central oxygen supply system and save costs, we also need to pay attention to the maintenance of the central oxygen supply system
The overall design takes into account many issues: firstly, the location of the oxygen station should be set up in a place that is not less than 7.5 meters away from other buildings due to the oxygen supporting substance. Buildings should be located as close and distant as possible from the ward building to reduce quality loss and dangerous accidents. The room should be well ventilated to maintain an indoor oxygen concentration of no more than 23. In order to be exposed to direct sunlight, other issues such as indoor ventilation and explosion-proof lights should be installed. Also considering the future, in order to avoid wasting people, materials, and finances.
There are many installation precautions for the central oxygen supply system, and doing well in the maintenance and attention required is crucial for better oxygen supply. We rely on modern processing equipment, high-tech workers, and experience as support, and honesty as the foundation. We welcome customers from various construction projects to come to the factory for negotiations.
Equipment and installation price of central oxygen supply system
Nowadays, oxygen concentrators or oxygen station buildings are commonly used for centralized oxygen supply. So how much does it cost to build an oxygen supply system?
The installation price of a medical center oxygen supply system is generally about 50% of the material cost. Taking a 100 bed hospital as an example, the gas includes oxygen, negative pressure suction, call intercom system, bedside power distribution and lighting equipment. Generally, the equipment with conventional configuration costs about 100000 yuan, and the installation cost is about 50000 yuan, with a total cost of 150000 yuan. If negative pressure suction is not required, the total cost is around 90000 yuan, and the configuration can also be made for around 80000 yuan. Even if the price is lower, it may not meet industry standards.
