Suitable for various types of micro small motors such as automotive motors, running motors, massage chair motors, etc. Fully automatic reducing and balancing machine

1、 Technical specifications

Name reference

The quality range of the workpiece is less than 1kg

The diameter range of the workpiece is 8 to 30mm

Workpiece shaft diameter range 1.0 to 10mm

Workpiece axis length 120mm

The thickness of the rotor silicon steel sheet stack is 10 to 45mm

Working pressure 0.4 to 0.6MPa

Working voltage AC: 380V

The equipment occupies an area of less than 1.5 cubic meters

The weight of the device itself is less than 1500kg


2、 Performance parameters

Name parameter

Unbalanced mass, repeated accuracy 2mg

Unbalance can be displayed within a range of 0.01mg

Can remove weight imbalance of 200 to 1000mg (depending on rotor size)

Up to an unbalanced amount of 5mg (based on rotor size and original quantity)

The weight removal rate of an unbalanced quantity is greater than 95% in one go

Measure and detect the speed range from 1000 to 2500r per minute

Working cycle time 5 to 8 seconds (based on the original rotor quantity)

Hourly production capacity of 500 to 800

The above parameters are for reference only. The specific model parameters will be customized according to the tested motor rotor.