Home decoration will use panels, so how to choose panels and how to identify them when selecting panels? Here are 5 key points:

Board selection 1. Check for obvious defects on the surface of the board
The surface of decorative panels should be smooth, without burrs or cutting knife marks, without glue penetration or surface contamination (such as local blackening and yellowing). It is recommended to choose panels with no cracks, fissures, knots, skin inclusions, resin pockets, or resin channels on the surface. The natural curvature of the entire panel should be minimized to avoid sand penetration from the substrate due to improper sanding process operation.

Board selection 2. Recognize the difference between thin wood veneer and natural wood veneer veneer board
The texture of the former board is basically straight texture, and the texture pattern is regular; The latter board is made of natural wooden patterns, and the texture patterns have a relatively large variability and irregularity.

Board selection 3. Appearance inspection of board
Decorative panels should have a good aesthetic appearance, with delicate and uniform materials, clear colors, and beautiful wood grain. The texture of the panel and the mosaic should be arranged according to a certain pattern, with similar wood colors and almost parallel seams to the edges of the panel.

Board selection 4. The adhesive layer structure of the board is stable and there is no glue cracking phenomenon
Attention should be paid to the absence of bulges or delamination between the surface of the board and the substrate, as well as between the layers inside the substrate.

Board selection 5. Choose boards with low formaldehyde emissions
Do not choose decorative panels with other odors. Because the stronger the odor of the board, the higher the amount of formaldehyde released, the more severe the pollution, and the greater the harm.