Medical equipment is fixed on the wall above the bedside of the ward, used to install power sockets, call buttons, power switches, gas valves for central oxygen supply and negative pressure suction systems, and other medical equipment such as infusion devices and other alarm devices.
1. The medical equipment belt adopts aluminum alloy material one-time molding technology, which is extruded by large tonnage hydraulic equipment and treated with overall spraying. There are multiple colors to choose from, and different modules can be sprayed in different colors according to user needs. The appearance is beautiful, easy to clean, and the gas channel is separated from the electrical channel. It is safe and meets the standards of medical equipment in the United States and the European Community. It can be adjusted according to the actual situation on site and can be customized according to engineering needs.
2. Separate the gas channel from the electrical channel, ensuring safety and compliance with the standards for medical equipment in the United States and the European Community
3. The standard lengths are 1000mm and 1200mm, which can be adjusted according to the actual situation on site
4. According to engineering needs, gas outlets such as central oxygen supply and negative pressure suction can be set up, as well as air outlets. Air outlets can also be configured, and lighting fixtures can be optionally installed (one on each bed head, belonging to the Philips fluorescent lamp series). The lighting fixture is 180mm long and comes standard with one power socket and one switch per section. If other electrical equipment is needed (such as audio and video sockets).
5. The gas pipeline has undergone airtightness testing and is safe
6. Optional call and intercom panels, or reserved installation holes according to hospital needs
7. The color of the equipment panel and side panel should be customized according to the hospital's choice and the color of the ward wall
8. Humanized design, easy installation and maintenance
