summary:

This product is a high-temperature resistant, silicon free, and oil free release agent made by compounding various materials such as polytetrafluoroethylene powder, dispersant, and leveling agent. Strong adhesion, otherwise prone to burning, stable at high temperatures up to 260 ℃.

Characteristics:

Dry and highly lubricating.

Waterproof and prevent dust adhesion.

High smoothness, can be directly decorated without cleaning after demolding.

Free of CFC's and environmentally friendly.

Does not contain silicone oil components.

Scope of application:

The demolding and release of steel plates, pins, and bushings on PCB multi-layer pressed circuit boards (prone to adhesive leakage during high-temperature pressing, such as epoxy resin).

Usage:

Ensure that the product model is consistent with the intended use and spray evenly on the mold from a distance of 15CM-25CM.

Precautions for use:

Attention should be paid to ventilation in the workplace, smoking is strictly prohibited, and operators must be trained to take up their posts. They are not allowed to hold products towards personnel, spray sparks, use sharp objects to cut the tank, or collide with the tank. (There is a risk of explosion if the tank is scratched or hit).

Storage precautions:

Store in a cool, ventilated and dry place, away from fire, in a warehouse with a room temperature below 45 ℃, and do not invert.

Do not approach corrosive substances such as heat sources, acids, alkalis, oxidants, etc., and do not expose to direct sunlight.

The stacking layer should not exceed 8 boxes and should be at least 10cm away from the ground and wall.

Precautions for handling:

When handling products, they should be handled with care and dangerous actions such as throwing or hitting are strictly prohibited.

Precautions for empty cans:

Stack neatly in the designated location, store in a cool, ventilated, and dry place, away from fire, power sources, and in a warehouse with a room temperature below 45 ℃. Do not expose to direct sunlight.

Important statement:

The information contained in this manual is based on our existing knowledge and good credit. It is only indicative information and not binding, especially regarding the infringement and bias of third-party rights during the use of the product.

Our company guarantees that the products sold are in accordance with the sales specifications.

Only necessary preliminary testing can determine whether a product is suitable for a specific purpose, and this information cannot replace preliminary testing to determine whether a product is suitable.