Explanation of High Pressure Cement Grouting Machine
Machine characteristics: 1. Fast construction: It can increase the working pressure to 0-13000 SPI within seconds, and the infusion time is faster than other models. 2. Lightweight: The body weighs only 7kg, making it easy to carry and move. 3. Easy to repair: No special training is required for maintenance, eliminating the need for mechanical repairs and downtime. 4. Continuous pressurization: The medication can effectively fill the fine cracks and honeycombs, effectively filling the structural cracks and honeycombs. 5. Durable: The body parts remain unchanged under high pressure of 10000 SPI. 6. Applicable materials: Pu foaming leak proof agent, epoxy resin, non granular low viscosity liquid.
Description of High Pressure Cement Grouting Machine
D. Disassemble the nozzle: After 24 hours of grouting, confirm that there is no leakage before removing or knocking off the exposed grouting nozzle. clean up Clean and solidified leaked grout. After the construction is completed, pour the remaining polyurethane sealing material back into the bucket and then pour it back (about 600cc). First, remove all the remaining agent from the feeding pipe, confirm that there is no agent in the feeding pipe, and then put the switch valve back into the funnel for circulation. The cycle cleaning time is 3-5 minutes, repeat this action twice, pour 50cc of engine oil after cleaning, turn on the switch to lubricate the shaft with engine oil.
Customized high-pressure cement grouting machine
Specific operation plan for grouting Grouting construction process flowDetermine waterproofing and plugging plan → crack surface treatment → bury grouting holes → seal joints → seal inspection → prepare grout → grout → inspect and seal completed1.Determine the waterproofing and plugging planBefore plugging, an on-site investigation must be conducted to understand the construction situation, analyze the causes of water seepage, and determine the length, width, depth, and penetration of the leaking area, cracks, fissures, or perforations.2.Surface treatment of cracksRemove dust, floating debris, and loose layer dirt from the surface of the crack, then use a brush dipped in organic solvents such as alcohol and acetone to clean both sides of the crack30～50mmClean the area thoroughly and keep it dry
