Introduction to Shell Stripping Machine
peanut shellerIt consists of a frame, fan, rotor, single-phase motor, screen mesh (available in two sizes), feeding hopper, vibrating screen, V-belt pulley and its transmission V-belt, etc. After the peanut sheller operates normally, the peanuts are quantitatively, uniformly, and continuously fed into the hopper. Under the repeated impact, friction, and collision of the rotor, the peanut shells are broken. Under the rotational wind pressure and impact of the rotor, peanut kernels and broken peanut shells pass through a sieve with a certain aperture (a large aperture sieve is used for secondary threshing of peanuts, and a small aperture sieve is used for secondary dehulling of small skinned fruits after cleaning). At this time, the peanut shells and kernels are subjected to the blowing force of the rotating fan, and the lightweight peanut shells are blown out of the machine. The peanut kernels are screened through a vibrating sieve to achieve the purpose of cleaning.
Specification of shell stripping machine
Working principle: Peanut fruits are manually fed and first fall into the coarse grid. Due to the rotation of the grid plate and the rubbing force between the fixed grid bar and the concave plate, the peanut shells are peeled off and separated, and the peanut kernels and shells are simultaneously dropped through the grid. Then, most of the peanut shells are blown out of the machine by wind through the air duct, while the peanut kernels and some of the peanut small fruits that have not been peeled off fall into the specific gravity sorting screen together. After re screening, the peanut kernels go up from the separation screen surface and flow into the burlap bag through the material port. The peanuts (small fruits) that have not been peeled off go down from the screen surface, enter the elevator through the discharge port, and are sent to the fine grain grid for secondary peeling by the elevator. After passing through the specific gravity branch screening and sorting, they can reach the desired level. Completely peel off.
Types of shell peeling machines
The shell removal machine solves the problem of heavy labor intensity and low production efficiency in traditional manual shell removal. The processing capacity is 300 kilograms per hour. There are three models of shellers: small, medium, and large. The chestnut sheller is a professional chestnut sheller produced by our factory through unremitting efforts, continuous improvement, and testing! Solved the problem of heavy labor intensity and low production efficiency in traditional manual shelling. The advantages of chestnut shelling machine include single-phase power supply, low power consumption, small size, light weight, easy installation and movement, and can be used by chestnut farmers' families. There are also large machines available for merchants to use.
