Explanation of Chicken Manure Drying and Drying Separators

Features: The spiral extrusion solid-liquid separator is mainly composed of a main unit, an unobstructed pump, a control cabinet, pipelines, and other equipment. The components of the host organism, mesh screen, extrusion winch, vibration motor, reduction motor, counterweight, and unloading device. The working process is as follows: the non clogging pump pumps unfermented pig manure into the body, accelerates the feeding under the action of the vibration motor, and gradually pushes the manure water forward of the body through power transmission, while continuously increasing the pressure at the leading edge, forcing the moisture in the material to be squeezed out of the mesh screen and flow out of the drainage pipe under the filtering effect of the edge pressure belt. The operation of the extruder is continuous, and the material is continuously pumped into the body. The pressure at the leading edge increases continuously. When it reaches a certain level, the discharge port is pushed open to extrude the extrusion port, achieving the purpose of extruding the material. In order to control the speed and moisture content of the discharge, the counterweight block below the main engine can be adjusted to achieve a satisfactory and appropriate discharge state. The spiral extrusion solid-liquid separator has high automation level, simple operation, easy maintenance, large daily processing capacity, low power consumption, and is suitable for continuous operation. Its key components are made of stainless steel material, with a total weight of nearly half a ton and small external dimensions. It is an ideal solid-liquid separation equipment for large-scale pig farms, which can greatly improve solid-liquid separation and efficiency. But at the same time, there are strict requirements for many factors such as drainage technology, environmental characteristics, capacity and structure of manure storage tanks, and drop height of manure drainage ditches in poultry and livestock farms. Firstly, there is a minimum requirement for the separated material, which should be unfermented fecal water. From the perspective of process requirements, a fecal water storage tank should be built to store the fecal water. If it is found that the concentration of the fecal water to be separated is too dilute and its solidified content is less than 3%, using an extruder will greatly reduce the discharge efficiency. In order to improve the efficiency of solid-liquid separation, it is required to build a sedimentation tank with a capacity of 30 cubic meters to 40 cubic meters in front of the storage tank. This tank is slightly higher than the storage tank and has an overflow port above it, allowing the relatively dilute manure to overflow from the high position. The bottom of the tank will correspondingly deposit more concentrated materials, and then solid-liquid separation can greatly improve the discharge speed. The livestock manure treatment machine (also known as the livestock manure dewatering machine, livestock manure solid-liquid separator, livestock manure urine water separator) can efficiently pump the livestock manure from the septic tank to the solid-liquid separator through a dedicated submersible cutting pump for solid-liquid separation, separating solid manure and manure liquid with a water content of only 40% or less!

Description of Chicken Manure Dry Wet Separators

Facility construction:

1. Renovation within the enclosure.Renovate the enclosure and replace the original sewage outlet with a floor drain (long)40cm×wide30cm)， Urine and sewage leak into the sewage sedimentation tank. This makes it easier to dofecesSeparate and easy to clean and disinfect.

2. Build a fecal accumulation tank (fermentation tank).Production of feces per pig per day1.5 kilograms, collect 4 cubic meters of feces from 100 pigs for 20 days, and ferment for another 20 days, which also requires 4 cubic meters. Design a stacking fermentation tank with 8 cubic meters for 100 pigs.

Type of chicken manure wet dry separator

What is a solid-liquid separator

solid-liquid separator

Also known as: cow manure/pig manure dewatering machine, cow manure/pig manure processing machine, cow manure/pig manure dry wet separator. This cow manure/pig manure solid-liquid separator adopts a spiral extrusion continuous operation solid-liquid separation dewatering, and is an excellent equipment for treating manure in large and medium-sized cattle and pig farms.

After solid-liquid separation and dehydration treatment by this machine, the moisture content of cow manure or pig manure is low, only 50% -65%. It has a fluffy appearance, no viscosity, reduced odor, and cannot be squeezed out by hand or thrown into clumps. The processed dry cow manure and pig manure can be directly bagged or sold. The moisture content of the processed manure is the optimal condition for fermenting pig manure organic fertilizer, and can be directly mixed with fermentation strains for organic fertilizer production.

This machine can be widely used for the separation of high concentration organic wastewater from animal manure, distiller's grains, medicinal residues, starch residues, sauce residues, slaughterhouses, and various intensive breeding farms for chickens, cows, horses, and other livestock.