Fix the circular frames inside the oven onto the rotating circular tubes as required.Connect the power supply, set the left and right ignition switches to the off position, and turn on the main valve of the gas cylinder.Electronic ignition: Press and hold the two handles of the door with one hand, and turn the ignition switch 90 degrees left by pressing the knob with the other hand. The sound will be heard and the electric spark will ignite the ignition tube. Only after confirming that the burner has burned can the hand be released. Otherwise, it cannot be ignited. The firepower level can be adjusted by rotating "on" and "off".When using an electronic ignition roast duck oven for the first time, a single ignition may not ignite because the connecting pipe is not yet filled with gas. Repeat the ignition process two to three times to ignite.Turn on the power switch, turn on the rotary switch, and put the ducks one by one into the oven to bake.Observe the temperature gauge reading and adjust the gas supply according to the baking needs.

The roast duck oven uses liquefied petroleum gas, which is mixed with air and fully burned in the combustion chamber of the furnace, with uniform firepower, fast heating, and low gas consumption.The furnace body is made of stainless steel material, and the temperature resistant tempered glass is used as the curtain wall, which is transparent, intuitive, clean and hygienic, and has a beautiful appearance.High quality ignition system for gas, rotating motor, wide temperature resistant glass window for easy viewing.The food is hung on a rotating rack for baking, with uniform color and delicious taste.Equipped with tempered glass display, automatic temperature control, timed alarm, and electronic ignition.

When using this device, it is necessary to connect the safety protection grounding wire,In rooms using gas ovens, good ventilation conditions are necessary.During the operation, the operator is not allowed to stay away from the gas roasted duck oven. If the combustion gas in the oven stalls, the ignition switch should be immediately turned off, the gas source valve should be closed, the cause should be identified and eliminated, and the gas odor in the oven should be blown out before reigniting.When using this device, it is necessary to connect the safety protection grounding wire.In rooms using gas ovens, good ventilation conditions are necessary.Leakage and illegal use are strictly prohibited.