strongSand agent
SpoweStrong sandAgent is a highly permeable water-soluble product. The main components are inorganic silicon compounds and a small amount of crystallization catalyst. Specially developed for the occurrence of sanding in existing concrete floors due to poor construction, lack of wear resistance, and low strength.
1Introduction:
Strong sandAgent is a type ofWhite lotionEasy to use, non-toxic, non flammable, and highly permeable long-lasting cement sealant with excellent permeabilitystrongIt can fully react chemically with the cement on the concrete floor, forming a very solid three-dimensional space on the concrete floor. This not only solves the original problems of sanding and sand return, but also improves the hardness and wear resistance of concrete floors. So that the service life of the repaired concrete floor can reach15Years or more.
IIPrinciple:
Strong sand agentDirectly sprayed onto the concrete surface layer, penetrating into the interior of the concrete, activating the cement hydration reaction. Under the action of silicon element and fluoride, the free state lime particles in the concrete will form crystals with a hardness similar to granite, thus obtaining a dust-free and dense whole, effectively improving the strength, density, and wear resistance of the concrete surface.
After solving the problem, tighten the pores of the concrete and effectively inhibit the entry of external pollutants into the concrete. Greatly enhance the surface hardness and wear resistance of new and old concrete floors. Improve the compressive strength of new and old concrete flooring. Inhibit the erosion of chemical substances. It reacts with the chemicals in concrete to form a gel in its pores. Prevent concrete from peeling and cracking. Seal concrete to enhance its density.
IIIprocess flow：
1、Strong sand agentPrepare brooms, floor grinders, dual-purpose vacuum cleaners, etc. before construction.
2、Surface treatment removes all exposed sand from the surface, and then uses a polishing machine to polish the loose parts of the ground surface. In addition, all residues on the concrete ground need to be removed, and if there are acidic components, ground neutralization must be carried out.
3、splashStrong sand agent，also canSpray with spraying equipmentsurface。Strong sand agentIt's permeablematerial,Surface spraying or rolling coating can be evenly applied。
4、interval24hourafterIf the area with severe looseness on the ground needs to be repainted.
4、 Packaging and Storage:
1、This product is packaged in barrels:25kg/bucket
2Store in a cool and dry place, do not expose to direct sunlight, and do not come into contact with bright water.
