Spowe injection type tendon adhesive

1、 Product Introduction: SpoweInjectable reinforcement adhesive is usually a very common substrate reinforcement material in the construction industry. The product characteristics of this planting adhesive include the following:

1. It has a fast curing speed, strong anchoring force, and similar embedment;  
2. It has no expansion stress and good seismic performance;  
3. Convenient and fast, without glue;  
4. Good anti-aging and medium resistance (acidic and alkaline water);  
5. This product is particularly suitable for planting reinforcement in horizontal and vertical holes.  
2、 Usage: Spowe injection support devicePlanting adhesive does not require dispensing. This injection type planting adhesive uses a gun barrel for injection, which can save a lot of adhesive dispensing time. For personnel who are rushing to complete engineering projects, this is very convenient and easy to operate. It is easy to use and fast.Spowe injection supportThe outlet of the planting adhesive has a rotating plug sleeve. When it needs to be used, release the screw cap and pull out the outlet plug sleeve. Rotate the static mixing pipe at the material outlet, pull the planting adhesive gun to the fully open position, and then install the planting adhesive on the surface of the planting adhesive gun specially used for injecting planting adhesive. Then inject the adhesive and implant the steel bars. 
The opening process can be seen in the attached image below:

IIICuring time of planting adhesive

4Construction steps for planting reinforcement adhesive: 
1. Drilling of substrate
2. Clean the borehole thoroughly
3. Inject the planting adhesive into the hole
4. Slowly screw in the steel bars or screws
5. Wait for the colloid to solidify
After curing is completed, loading can be carried out

5Packaging and storage conditions for transportation:
1·This product is packaged in double plastic hard tubes, 30 pieces/box, 360ml/piece.
2·This product belongs to non hazardous materials and can be transported as general chemical building materials.
3·This product is stored dry at room temperature (25 ℃) for a storage period of 12 months.