The original filling material at the gap of the sesame ash fire burned board should be removed before renovating the sesame ash fire burned board. The original gap can be re cut with electric tools to reduce the width difference of the sesame ash fire board gap, or cleaned with tools. Using marble glue that is similar in color to sesame ash fire burned board will increase the overall feeling. Special marble glue can be used for color matching to give sesame ash fire burned board stone a better visual effect. Due to the small shrinkage of the marble adhesive after it is completely cured, the filling height of the marble adhesive should be slightly higher than the horizontal plane of the sesame ash fired board stone when filling. This operation is to avoid the phenomenon of gaps below the horizontal plane after repair.
At present, the application scope of sesame ash fired board stone is constantly expanding. Sesame ash fired board stone is one of the famous granite stones, which can be used for various buildings such as flooring, tabletops, engineering exterior wall panels, interior wall panels, building stones, and large engraving. As a type of stone, sesame ash fired board has good application effects, but attention should be paid to some issues that may arise during the maintenance of sesame ash fired board stone.
Oil stains are a common type of stain in sesame ash fired stone slabs. Faced with this type of grease stain, we can use a tissue to absorb it, and then spray the stain area with absorbent. After allowing it to stand for 1-2 hours, wipe the surface of the sesame ash fired board stone with a damp cloth, and then dry it off.
Nail polish is another kind of stain and has a strong taste. If sesame ash fired stone is accidentally contaminated by it, the degree of damage exceeds our imagination. Therefore, when faced with this situation, we can drop a few drops of dishwashing liquid from half a liter of warm water on the surface of the sesame ash fire burned board stone, spray it, and then wipe it clean with a clean white cloth without leaving any dishwashing liquid. Use another damp cloth to wipe off any remaining liquid and dry until the stains are removed, then repeat the cleaning process.