Analysis and treatment of lesions in fire burned stone slabs, fire burned stone slabs occupy a place in the stone market. However, many consumers have reported that after purchasing, stone slabs may have lesions, such as dull color, breakage, etc., without realizing that these problems are actually caused by our lack of care in stone maintenance.
There are various methods to treat the lesions of fire burned stone slabs, and a good treatment method is based on the effectiveness of the treatment. There are currently several main methods mastered:
(l) Cleaning method. Usually, chemical, mechanical, physical, and biological methods are used to remove most of the pollution from burnt stone slabs.
(2) Protection Law. In order to achieve the purpose of preventing lesions and maintaining burnt board stone, burnt board stone protective agent is used.
(3) Grinding method. Use machinery and tools to remove and repair burnt stone materials with lesions or defects.
(4) Replacement method. Replace the stone that cannot eliminate lesions and defects with the same type of fired board stone.
(5) Adhesive method. Repair the damaged fire burned board stone with adhesive, ultimately achieving the goal of strengthening and fixing the fire burned board stone.
(6) Covering method. Cover the defective fire-resistant board stone with materials that do not affect its ornamental and aesthetic properties.
(7) Repair method. Repair the defective fire burned board stone with chemical materials to make it complete.
(8) Dyeing method. In order to achieve the goal of eliminating color difference, the fire burned board stone that affects aesthetics and beauty is dyed.
(9) Sealing method. Seal and protect the fire burned board stone when it is about to become diseased.
(10) Separation method. Separate the attachments or unremovable pollutants on the main stone of the fire burning board.
(11) Application method. Apply medication at the site of stone lesions to achieve the goal of oxidizing, reducing, and adsorbing the components of the lesions.
(12) Other methods such as carving, steam, reduction, sandblasting, water spraying, fire, laser, etc. The purpose is to restore the beauty, performance, and decorative effect of the stone, as well as eliminate any damage or defects in the stone.