What are the issues to pay attention to when using curbstone protection products? Let's learn together below.
(1) Compatibility. The selected product should not affect the color of the curbstone. If it is wet pasting construction, it is necessary to check whether the bonding strength between the curbstone and cement will be affected when dealing with the back of the curbstone.
(2) In the case of wet pasting construction, in order to do a good job in the treatment of the back and side of the curbstone, it is important to choose a protective agent with good waterproof effect.
(3) When choosing a protective agent for ground curbstones, not only should the back of the curbstone be waterproofed, but also the front of the curbstone should be appropriately protected according to different usage environments. Some places like hospitals should choose products with good anti fouling performance, and protective products with good anti fouling and anti oil effects are suitable for places like hotels.
(4) The significance of protecting the back of the dry hanging curbstone is not significant anymore, but corresponding protective products can be selected for the front of the dry hanging curbstone according to the usage environment and the characteristics of the curbstone.
(5) For some gray white granite and marble that are prone to damage, roadside stones often exhibit rust or yellowing under humid conditions. This requires special attention to waterproofing treatment and the selection of protective agents with good waterproofing effects.
(6) For granite materials that are loose and have high water absorption rates used in public environments, the selected products should be waterproof, anti fouling, and have good anti fouling effects, so that they can be easily cleaned once contaminated.
(7) If the board breaks after proper protective treatment, its parts should be re protected after repair.
(8) Due to effectiveness or other reasons, protective treatment needs to be carried out again, but the roadside stones have already been protected. Therefore, it is necessary to clarify the types and properties of the protective products used before cleaning, otherwise it is difficult to achieve satisfactory results.
(9) When selecting protective products, in order to test their overall effectiveness, they should first be tested on the same curbstone.
(10) It is recommended that construction workers or curbstone manufacturers provide curbstone protection suggestions to the owners in advance, otherwise the consequences and responsibilities should be declared in the corresponding documents.


































