How to clean car blocking balls based on different types of pollutants on the surface? Car blocking balls are quite common in our daily lives, but the cleaning methods used after installation vary due to the different types of pollutants. Below, we will explain how to adopt the correct cleaning method based on the different types of pollutants that cause pollution on the surface of car blocking balls.
1. For pollutants, neutral cleaning agents containing active agents can be used, or weakly acidic active formula materials can be used to clean dust and dirt. When cleaning, soak the mud stains for 5 minutes, then clean them with a brush, and finally rinse them clean. This will achieve the desired effect.
2. Rust stains are also difficult to clean dirt. The reason for rust stains is the chemical reaction of iron elements contained in the blocking ball, which requires chemical methods to treat the rust stains. Therefore, weak acid rust removers or well formulated rust removers are generally used to remove the blocking ball rust.
3. For pollutants such as oil that are difficult to clean, you can first gently scrape the surface with a small knife to remove the pollutants from the surface of the blocking ball. Be careful not to use too much force, only peel off a layer slightly, otherwise it will leave scratches on the surface of the blocking ball, which will affect its appearance. Then use a cleaning agent for cleaning.
The above is the method for cleaning the surface of the car blocking ball We need to clean the car blocking ball according to the cause when cleaning it. Our company specializes in producing car blocking balls and has rich experience in their characteristics and later maintenance work. We welcome customers to come to our factory for communication and negotiation.