After combustion, fuel coal contains a small amount of moisture, sulfur trioxide, and ash in the flue gas. On the heated surface at a lower temperature, sulfuric acid will condense, forming a layer of adhesive film
The surface adheres to the heated surface and corrodes the iron, while the other side continuously adheres to the ash content of the flue gas and forms various sulfates, gradually thickening. This is low-temperature wet slagging. At higher temperatures
On the heated surface, the adhesive bond is directly formed by the combination of sulfur trioxide and sodium oxide, resulting in the formation of low melting point sodium sulfate or even lower melting point sodium sulfate
Double salt and continuously adhere to the ash content in the flue gas, gradually thickening. This is high-temperature dry slagging, and oil fired boilers will coke with the high-temperature heating surface and furnace due to the low melting point of coal ash
The thermal resistance of ash residue is 400 times that of the metal thermal resistance of the boiler heating surface. It deteriorates the heat transfer condition of the heating surface, reduces the thermal efficiency of the boiler, consumes energy, or lowers the boiler
The pressure of the furnace cannot reach the rated evaporation capacity. Langfang Sanxing Chemical Co., Ltd.'s boiler slag remover can remove the ash and coke formed on the heating surface, keep the heating surface clean, reduce the thermal resistance of the heating surface, improve the thermal efficiency of the boiler, and increase the output of the boiler. And it can reduce the labor of cleaning the boiler, saving more than 5% of coal on the high and low temperature heating surfaces of the boiler
Corrosion prolongs the service life of boilers. For boilers equipped with heat pipe heat exchangers, the ash deposition rate on the heating surface of the heat pipe can also be reduced, and the ash can be made crisp and easy to remove, creating powerful conditions for the promotion and application of heat pipes. Through practical use, it has been proven that the indicators of the modified product have reached the international level of similar products. Currently, the modified product is sold to more than 20 countries nationwide
Provinces and cities are very popular.
The surface adheres to the heated surface and corrodes the iron, while the other side continuously adheres to the ash content of the flue gas and forms various sulfates, gradually thickening. This is low-temperature wet slagging. At higher temperatures
On the heated surface, the adhesive bond is directly formed by the combination of sulfur trioxide and sodium oxide, resulting in the formation of low melting point sodium sulfate or even lower melting point sodium sulfate
Double salt and continuously adhere to the ash content in the flue gas, gradually thickening. This is high-temperature dry slagging, and oil fired boilers will coke with the high-temperature heating surface and furnace due to the low melting point of coal ash
The thermal resistance of ash residue is 400 times that of the metal thermal resistance of the boiler heating surface. It deteriorates the heat transfer condition of the heating surface, reduces the thermal efficiency of the boiler, consumes energy, or lowers the boiler
The pressure of the furnace cannot reach the rated evaporation capacity. Langfang Sanxing Chemical Co., Ltd.'s boiler slag remover can remove the ash and coke formed on the heating surface, keep the heating surface clean, reduce the thermal resistance of the heating surface, improve the thermal efficiency of the boiler, and increase the output of the boiler. And it can reduce the labor of cleaning the boiler, saving more than 5% of coal on the high and low temperature heating surfaces of the boiler
Corrosion prolongs the service life of boilers. For boilers equipped with heat pipe heat exchangers, the ash deposition rate on the heating surface of the heat pipe can also be reduced, and the ash can be made crisp and easy to remove, creating powerful conditions for the promotion and application of heat pipes. Through practical use, it has been proven that the indicators of the modified product have reached the international level of similar products. Currently, the modified product is sold to more than 20 countries nationwide
Provinces and cities are very popular.
