Rock wool resin adhesive
1: Solid content 41%
2: Free phenol content 0.7%
3: Free aldehyde content 0.6%
4: PH value 8.8
5: Ash content 1%
6: Water solubility:>30 times
7: Fixed line time 14 minutes
8: Viscosity 8.5
Resin adhesive powderIt is a mixture of polymer resin adhesive powder, also known as epoxy resin adhesive powder or instant resin adhesive powder for construction. The types of polymer resin adhesive powder include: extruded board specific adhesive powder
Polystyrene board specific adhesive powder, multifunctional resin adhesive powder, rock wool board mortar specific adhesive powder, etc. It is refined from natural macromolecular materials, and the rubber powder is subject to high temperature, high pressure and spray
Dried and uniformly polymerized with various reinforcing micro powders, it can significantly improve the bonding ability (affinity bonding) and self adhesion of bonding mortar with polystyrene board, rock wool board, and extruded board
Body tensile strength, good fall resistance, water retention and thickening construction performance, less addition, strong adhesion, good acid resistance, alkali resistance, oil resistance, high temperature resistance, aging resistance
New and advanced products that increase costs and profits. Outstanding water resistance, freeze-thaw resistance, and heat aging resistance, easy to use, and low cost. Application scope: mainly used for
The additive in mortar for building and exterior wall insulation plays a bonding role, better bonding insulation boards. Currently, there are specialized rubber powder types available on the market for exterior wall panels,
Example: Extruded board extruded board system specific adhesive powder, polystyrene board polystyrene board system specific adhesive powder, rock wool board rock wool board mortar specific adhesive powder; Within 3 days, 100% of the board will be broken,
Only 10 kilograms of adhesive powder should be added per ton of insulation mortar. Note that if the board breaking time is more than 80 hours and the amount added per ton is more than 10kg, the effective proportion in the adhesive powder will be
The domestic extruded polystyrene board does not require the use of adhesive powder for brushing interface agents, which has low cost, good quality, and does not corrode the insulation board. It has good dispersibility during production and is used for bonding extruded polystyrene board
The optimal choice for bonding and plastering anti cracking mortar.
