Performance characteristics of the 4-40B small unburned brick machine:

1. Widely used raw materials: slag, sand, crushed stone, aluminum red slag, electrolytic copper slag, coal gangue, construction waste, fly ash, volcanic slag and other raw materials. The raw materials are abundant and can be seen everywhere, making it convenient to invest in and build factories

2. In addition to the frame itself, the suspension and connection parts of the small non fired brick machine are all equipped with springs. During vibration molding, not only does the four pipes of the press head, mold box, mold core, and support plate vibrate together, ensuring high density and uniformity of the product, but it also runs smoothly with low noise, achieving good vibration reduction effect.

3. The small non fired brick press head can move longitudinally for easy feeding, maintenance, and flushing. At the same time, the drop distance of the press head is small, only 20mm. On the one hand, the gap between the press foot and the box or core is small, and the block has no large burrs; On the other hand, there is less damage to the box core.

4. The small non fired brick machine has convenient mold replacement. By replacing the mold, various solid bricks, hollow bricks, and curbstones can be produced. Various special-shaped molds can also be customized according to user requirements.

5. The bottom wooden support plate of the small non fired brick machine resonates synchronously with the box core during molding, and is not subjected to impact force, so the service life of the wooden support plate is more than twice that of similar products.