Hollow brick machine, small 4-35A brick making machine, 5 square holes, 150 hollow unburned cement brick making machine equipment
4-35 Brick Machine Configuration List:
A 4-35 brick machine mainframe costs 8500 yuan. Randomly select a set of wear-resistant brick machine molds, a brick pulling cart, a scraper plate, and a bag of random accessories. Blender can be purchased at an additional cost according to customer needs!
1. Widely applicable raw materials: slag, slag, sand, tailings sand, stone powder, water slag, coal gangue, fly ash, construction waste, etc
2. Except for the rack itself, springs are used for the suspension and connection parts of the entire machine. During vibration molding, not only do the four pipes of the pressure head, mold box, mold core, and support plate vibrate together, ensuring high density and uniformity of the product, but also smooth operation, low noise, and good vibration reduction effect. The action is reliable, durable, and easy to maintain;
3. The pressure head can move longitudinally for easy feeding, maintenance, and flushing. At the same time, the drop distance of the pressure head is small, only 20mm. On the one hand, the gap between the pressure foot and the box or core is small, and the block has no large burrs; On the other hand, there is less damage to the box core.
4. One machine is versatile and has strong applicability. It can produce various shapes and specifications of wall blocks, support pads, road blocks, grid wall blocks, and curbstones with different molds; Mold replacement is convenient and various special-shaped molds can be customized according to user requirements.
5. The bottom wooden pallet resonates synchronously with the box core during molding, and is not subjected to impact force, so the service life of the wooden pallet is more than twice that of similar products.
6. Changing the traditional practice of demoulding reducers in China, using pulleys and chain sprockets for demoulding, the structure is simple, sturdy, durable, safe and reliable, easy to maintain, without any leakage of reducers, and saves power. The demoulding power is only 1.1kw.
7. The mold box adopts an assembly type, and vulnerable parts can be replaced, which is not only convenient for maintenance, but also saves users mold costs
8. A site of approximately 1000 square meters and 2-3 workers are required.
