The separator is composed of an automatic feeding machine and a double-screw hoist grading machine. The double-screw hoist grading machine is driven by double-screw rotation, which moves the hoist rods on the grading machine forward in parallel and gradually increases the gap between the rods, achieving the corresponding size for fruits and vegetables. This allows the produce to fall through the gaps onto the exit conveyor belt, completing the grading process.

The Application of Automatic Sorting Machines:

The Automatic Sorting Machine is primarily used for automatic weight detection, line-up and line-down discrimination, or weight grading selection on various automated packaging production lines and logistics conveying systems. It is widely applied in the online weight checking applications of industries such as beverages, food, daily chemicals, chemical industry, and light industry.

Some previous automatic sorting machines had complex structures, typically used in large-scale production lines, with higher manufacturing costs and slower sorting speeds, resulting in higher sorting costs. In contrast, the current automatic sorting machines are more cost-effective and easier to operate, thus earning positive feedback from many users.

A brief introduction to the basic operation steps of the separator:

Step one: After powering on, the fruits are manually poured into the feeding hopper, where they are lifted by the machine onto the running track.

Step two: The fruit plate is moved to the sorting area for weighing and sorting. The fruits then fall into the feed hopper, after which they are manually packed and bagged.

Step three: Adjust the weight of the counterpoise, set the sorting levels.

Step four: The fruit bowl at the end of the track will drop the fruit into the fruit tray, which moves at a constant speed (one fruit tray for each fruit).

Preparation before use is as follows:

Ensure all heavy-duty components are securely fastened.

Ensure the roller connections are adequately lubricated.

Ensure the conveyor belt is in good condition. Replace it immediately if any instability is detected. When oil stains are found on the conveyor belt or pulley, use a rag to wipe them clean.

Four, inspect the sorting chamber for any debris. If any objects are found, they must be thoroughly cleaned to ensure the sorting machine's cavity can be started.

Check if the top bolt has been retracted, if the washer group is tightened, and if the T-bolt is securely fastened.

Six, inspect the protective devices for proper functioning, and promptly address any instability issues.

The separator should be cleaned and oiled regularly during use, typically, the equipment can operate smoothly for over 5 years with timely maintenance. We hope the usage and pre-operation preparation of the separator can be of help to you. Also, pay attention to maintenance and care during daily use to ensure the equipment runs well!