Battery Features:

1. Excellent safety performance: No electrolyte leakage, no battery expansion or cracking under normal use.

2. Excellent discharge performance: steady discharge voltage, smooth discharge platform.

3. Excellent vibration resistance: Battery fully charged and securely fastened; subjected to 4mm amplitude and 16.7Hz frequency vibration for 1 hour without leakage, no battery expansion or cracking, and normal open-circuit voltage.

4. Excellent shock resistance: Battery in fully charged state dropped from 20 cm height to a 1 cm thick hardwood surface 3 times without leakage, no battery expansion or cracking, and normal open circuit voltage.

5. Excellent resistance to deep discharge: At 25°C, a fully charged battery undergoes a constant resistance discharge for 3 weeks (the resistance is equivalent to the battery's 1CA discharge requirement), with a recovery capacity of over 75%.

6. Excellent rechargeability: At 25°C, battery fully charged at 0.1CA for 48 hours, no leakage, no battery expansion or cracking, open-circuit voltage normal, capacity retention above 95%.

7. Excellent high current resistance: Battery fully charged, discharges at 2CA for 5 minutes or 10CA for 5 minutes. No conductive parts melt, no visible deformation.

Battery - Product Features:

Maintenance-free, no need for refilling.

Low internal resistance, excellent performance for high current discharge.

Wide temperature range (-35 to 45℃)

Self-discharge rate low.

Long lifespan (8-10 years)

Fully charged upon factory shipment; easy to use; safe and explosion-proof.

Formula, excellent deep discharge recovery performance.

No free electrolyte; can still be used after tilting 90 degrees sideways.

Battery Applications:

Emergency Lighting Systems; Electronic Instruments; Rail, Ship, and Postal & Telecommunication; Electronic Systems; Solar and Wind Power Generation Systems; Large-scale UPS and Computer Backup Power; Fire Backup Power; Peak Load Compensation Energy Storage Devices.

Battery Usage Precautions:

Do not connect together batteries with different capacities, performance levels, or manufacturers for use.

● Batteries or battery banks with the same actual capacity are permitted.

Batteries or battery banks with the same actual voltage may be connected in parallel.

Please use appropriate wiring for battery pack connections and outputs.

Always disconnect the power when connecting or dismantling; otherwise, there is a risk of electric shock or even explosion.

Poles must not be reversed or short-circuited; otherwise, the battery may be severely damaged, even causing an explosion.

● Fasteners should be tightened to prevent sparking; if the contact surface is oxidized, it can be cleaned with baking soda.

The newly installed battery bank should be floated charged for 72 hours prior to use to balance the internal charge of the battery bank, after which it can be tested or put into operation.