Using and Maintaining the External Round Polishing Machine
1 Place the workpiece into the track first.
3 Lock the track to incline it at a certain angle (the greater the angle, the faster the workpiece will advance).
Engage the guide wheel motor and move the grinding head to the workpiece if the forward speed is appropriate.
5 If threading occurs, it indicates a faster forward speed; accordingly, slightly decrease the inclination angle of the track.
During rough polishing, reduce the guide roller speed slightly; for fine polishing, increase the guide roller speed moderately.
7 Regularly check if the reducer is low on oil.
Check for any noises or slight movements inside the grinding head regularly.

Basic Technical Parameters
Power Supply: 380V, 50Hz
2. Total Power: Approximately 10.5KW, Main Motor: 3KW x 3, Feeding Motor: 1.5KW.
3. Total Machine Weight: Approximately 650 kg.
4. Mechanical dimensions: Length 1700mm x Width 750mm x Height 1560mm; Exhaust motor 0.75kw, 1.1kw
5. Feed Rate: Adjustable from 1 to 12 meters per minute, controlled by an infinitely variable speed motor.
6. Polishing Wheel: Speed 2800 RPM. Wheel Diameter 250-300mm, Width 40MM, Bore 32MM