Square tubeFour-sided polishing machine.

Model No.ZJ-180Input Voltage.380v.

4. Input Power: 3 kW x 4 units.

5. Feeding Motor - 0.75 kW

7. Feeding Efficiency. (1-12) meters/minute. (Optional).

8. Polished largest size: 100*100mm. (Customizable according to customer requirements.)

9. Polished smallest size: 10*10mm. (Customizable according to customer requirements.)

10. Polishing Length: Over 6000mm (Customizable according to customer requirements)

）
11. Weight: 1200 kg

12. Dimensions: 1800*1400*1500

Operation Method of Automatic Square Tube Polishing Machine - The key to operating a square tube polishing machine is to figure out how to achieve...The polishing rate of * is necessary to quickly remove the damaged layer that occurs during polishing. Additionally, it is essential to ensure that the polishing damage layer does not affect the final inspection, i.e., it should not cause false arrangements. The former requires the use of coarser abrasives to ensure a higher polishing rate for removing the damaged layer, but the polishing damage layer is also deeper; the latter requires the use of * finer material to make the polishing damage layer shallower, but with a lower polishing rate. The solution to this contradiction is to divide the polishing process into two stages. The coarse polishing stage is intended to remove the damaged layer, and this stage should have a * polishing rate. The surface damage caused by coarse polishing is a secondary consideration, but it should be kept as small as possible. The operation of the square tube polishing machine should allow the sample to rotate freely and move back and forth along the radius of the turntable to avoid excessive wear of the polishing cloth. The strip steel polishing machine should allow the hard phases in the sample to appear convex and the non-metallic inclusions in the steel and the graphite phase in cast iron to produce "tail" phenomena. In low humidity conditions, friction-generated heat can cause the sample to heat up, reducing the lubricating effect, causing the grinding surface to lose luster and even develop black spots, which can damage the surface of aluminum alloys. The key to operating the square tube polishing machine is to achieve an optimal polishing rate to quickly remove the damaged layer formed during polishing.