Electrode Welding Machine Welding Cable YH16mm2

Welding Machine Cable Product Description

    This product is suitable for secondary side wiring and connection of welding machines with alternating voltage not exceeding 200V and pulsating direct current peak voltage of 400V, as well as for connecting welding clamps. It is a dedicated cable for secondary side wiring and welding clamp connection on welding machines, with an rated voltage of alternating current not exceeding 200V and pulsating direct current peak voltage of 400V. The structure is single-core, made by twisting multiple strands of soft conductive wires. The outside of the conductor core is insulated with a heat-resistant polyester film tape, and the outermost layer is a rubber-insulating and protective sheath.

Usage Requirements:
(1)YH CablesOperates under low voltage (maximum voltage of 200V) and high current conditions, requiring a certain degree of tolerance.
(2) Welding CableCableThe long-term operating temperature should not exceed 65°C.
(3)Motor lead wireCableFrequent movement, twisting, and release require softness and good flexibility.
(4) The cable is susceptible to scratches and abrasions from sharp steel components during deployment, thus requiring good mechanical properties such as tear resistance and abrasion resistance.
(5) The operating environment is complex, including exposure to sunlight, boiling water, contact with mud and water, engine oil, acidic or alkaline liquids, etc. It requires certain climate resistance and resistance to oil and solvents.
(6) Occasionally, we encounter hot welding parts that require excellent heat-resistant deformation properties.
(7) Often moved, requires a small outer diameter and light weight. As the electrical performance requirements for this type of cable are not high and the operating environment is complex, it is not appropriate to structurally accommodate various complex environmental factors. Pay attention to improving the usage conditions when in use and prevent external damage.