1. Prisoner bedding is composed of bed slats, bed frames (including posts, slat frames, etc.), low backrests, and fixed connectors, etc. In response to the need for standardized bed construction by the Detention Facilities Management Bureau of the Ministry of Public Security, our company has developed a series of detention center bedding products and participated in the formulation of industry standards for detention center bedding. The products have been refined through comprehensive opinions and repeated testing and certification, fully meeting standard requirements. They feature innovative design, balancing the security needs of detention rooms and the convenience of inmates.

2. Prison Beds - Technical Specifications: Fixed steel-wooden beds, primarily made of steel, hard mixed wood, and high-density environmentally friendly boards. Utilizes plating, heat treatment, coating, riveting, rounded corners, and incorporates special technologies such as fixed, blind riveting, and irreversible tightening to ensure the product's safety, stability, environmental friendliness, comfort, aesthetics, and resistance to corrosion, rust, deformation, and damage.

3. Prison Bed Appearance Requirements: ①All metal parts (excluding stainless steel) should be treated with anti-corrosion coating, with a smooth and even surface finish, free of defects such as exposed bottom, bubbles, obvious堆积, peeling, etc. The coating should have a bright, even color, free of rust spots. ②Wooden parts should feel smooth to the touch, free of scratches, indentations, hazy finish, white streaks, white spots, bubbles, drips, bristles, dust accumulation, and impurities, as well as obvious color differences, wrinkles, stickiness, and paint leakage. Non-joint surfaces should be sealed or coated, with no defects such as adhesive failure, bubbles, seepage, or exposed bottom. ③Areas in contact with the human body or storage items should be free of burrs, sharp edges, or sharp corners. The fixed parts should be securely fastened without any loose connections, missing parts, or loose fittings (except for pre-drilled or selected holes).